A little off topic but still about the same resin ... I bought a bottle of Solus Wax Pro, does anyone know what ballpark I should be in in terms of settings (exposure time) and such on a B9 Core 550?
Also is there an official burnout and curing schedule im somehow missing?
Thanks
Search found 66 matches
- Thu Sep 17, 2020 11:49 am
- Forum: Resins
- Topic: Solus Wax Pro
- Replies: 12
- Views: 28764
- Mon Aug 28, 2017 4:52 pm
- Forum: Resins
- Topic: Introducing the SolusCast resin
- Replies: 99
- Views: 292080
Re: Introducing the SolusCast resin
Whats the burnout schedule on this like? does it work well for stone in place type casting? (assuming since its resin it won't melt around stones like wax?
- Sat Aug 06, 2016 10:22 pm
- Forum: Resins
- Topic: MakerJuice WaxCast Resin
- Replies: 27
- Views: 96934
Re: MakerJuice WaxCast Resin
Does anyone have a reliable way to get wax cast to stick to the build table ... on larger items it falls off infuriatingly for me ...
Trying to get it to work for certain pieces that we want to wax set due to their very light gold (and thus very thin)
Thanks
Trying to get it to work for certain pieces that we want to wax set due to their very light gold (and thus very thin)
Thanks
- Wed Jun 01, 2016 4:28 am
- Forum: Resins
- Topic: MakerJuice WaxCast Resin
- Replies: 27
- Views: 96934
Re: MakerJuice WaxCast Resin
So tested a lot of mixes before I got to pure ... and even a 5%-7% mix makes the supports far more livable and the prints work more consistently for me than MJ straight where i ended up breaking quite a few models either in print or when trying to cut away supports(which end up too thick to work)
- Sun May 29, 2016 8:27 pm
- Forum: Resins
- Topic: MakerJuice WaxCast Resin
- Replies: 27
- Views: 96934
Re: MakerJuice WaxCast Resin
K So I UV Cured in water before i realized on another topic that it wasn't advised Any negative effects expected from this? Attaching images of what they look like now This is roughly 95-93% Wax Cast 5-7% Emerald After 50 mins in the sun in a bowl of tap water In the process of trying a similar mix ...
- Sun May 29, 2016 1:46 pm
- Forum: Resins
- Topic: MakerJuice WaxCast Resin
- Replies: 27
- Views: 96934
Re: MakerJuice WaxCast Resin
Can you heat cure Waxcast or is it only UV cure?
- Sat May 28, 2016 4:16 am
- Forum: Resins
- Topic: Hybrid Resin Blend (WaxCast and Emerald)
- Replies: 57
- Views: 169460
Re: Hybrid Resin Blend (WaxCast and Emerald)
Has anyone tried printing say 25:75 Emerald : WaxCast or even 10:90 Emerald:Waxcast to see if one can get away with support and such issues while still retaining the wax characteristics of Wax cast? I'm going to try it this weekend .. what settings would be a good starting point for hybridizing to t...
- Sat May 21, 2016 9:56 pm
- Forum: Resins
- Topic: MakerJuice WaxCast Resin
- Replies: 27
- Views: 96934
Re: MakerJuice WaxCast Resin
sgraber wrote:We have successfully done stone-in-place casting with it during testing.
Shane
What is the burnout temp when you do this? ... I assume mixing it with Emerald would forfeit this feature
Thanks!
- Sat May 21, 2016 3:28 pm
- Forum: Resins
- Topic: MakerJuice WaxCast Resin
- Replies: 27
- Views: 96934
Re: MakerJuice WaxCast Resin
Hey everyone, For all that is interested the Maker juice resin can be treated the same as machine wax ONLY after it has been fully cured. Cure time is dependent on the thickness and most take as long as 2hrs to fully cure. I have a cure box but what works the best for me is direct sunshine. Burnout...
- Wed Apr 13, 2016 4:54 pm
- Forum: Gallery
- Topic: Prints by Monger
- Replies: 173
- Views: 383093
Re: Prints by Monger
Assuming this proto resin is different from your casting resin which is still pending release?