Search found 51 matches

by Kevin
Fri Dec 28, 2018 8:50 pm
Forum: Help and Troubleshooting
Topic: Failed Proto Resin after bulb change
Replies: 10
Views: 3944

Re: Failed Proto Resin after bulb change

ummmmmmm... what UV filter?


I didn't remove anything, was I supposed to?
by Kevin
Fri Dec 28, 2018 5:56 pm
Forum: Help and Troubleshooting
Topic: Failed Proto Resin after bulb change
Replies: 10
Views: 3944

Re: Failed Proto Resin after bulb change

48x27 I might be able to get more room by rotating the bracelet around the Z but right not that is as horizontal as I can get it. The problem seems to be where the model meets the supports. It doesn't matter how thick the supports or the connections are or what model I'm growing. All models have bee...
by Kevin
Sun Dec 23, 2018 7:30 pm
Forum: Help and Troubleshooting
Topic: Failed Proto Resin after bulb change
Replies: 10
Views: 3944

Re: Failed Proto Resin after bulb change

Supports bumped up to 1.5 and the tips are now at .6

I'm still getting the same results


Image
Image
by Kevin
Fri Dec 21, 2018 8:44 pm
Forum: Help and Troubleshooting
Topic: Failed Proto Resin after bulb change
Replies: 10
Views: 3944

Re: Failed Proto Resin after bulb change

I followed your link from another thread but it was dead https://www.infocus.com/store/accessories/projector-lamp-for-in8606hd So we bought a lamp assembly from elsewhere. After searching through the infocus website today I think I found the correct assembly. https://www.infocus.com/products/sp-lamp...
by Kevin
Fri Dec 21, 2018 5:30 pm
Forum: Help and Troubleshooting
Topic: Failed Proto Resin after bulb change
Replies: 10
Views: 3944

Failed Proto Resin after bulb change

https://i.imgur.com/NR5NNf1.jpg https://i.imgur.com/ZvjUgKC.jpg I'm having trouble getting prints to come out. Recently changed the bulb with what I was told was a original factory bulb. I've changed the film and have made sure my resin is thoroughly mixed. Using normal touch points and I bumped th...
by Kevin
Tue Oct 30, 2018 5:39 pm
Forum: Help and Troubleshooting
Topic: trouble with scale adjustment
Replies: 3
Views: 1943

Re: trouble with scale adjustment

ok, I can work with that. Is there a way to wipe the adjustments memory and start over fresh?
by Kevin
Tue Oct 30, 2018 5:06 pm
Forum: Help and Troubleshooting
Topic: trouble with scale adjustment
Replies: 3
Views: 1943

trouble with scale adjustment

I'm trying to print a ring that is 17.5mm tall on the inside but is coming out 16.4mm. When I enter those numbers into the scale adjustment I now get a ring that is coming out 17.9mm. When I enter those numbers it goes back to the 16.4mm size. It just keeps going on like this. I have reloaded the sc...
by Kevin
Fri May 12, 2017 9:37 pm
Forum: Tips and Tutorials
Topic: How to enable STL file thumbnails in Windows File Explorer
Replies: 18
Views: 71138

Re: How to enable STL file thumbnails in Windows File Explorer

Thank You! I have been searching for years for something just like this.
by Kevin
Wed Mar 08, 2017 7:27 pm
Forum: Help and Troubleshooting
Topic: arm stuck at lowest position
Replies: 14
Views: 8063

Re: arm stuck at lowest position

I got the new motor in and everything is back up and running. Apparently Some resin had dripped into the motor and eventually froze the bearing, probably from the time I poked a bunch of tiny holes in the film by running the machine with some unknown floaters in the resin. I cleaned it up but didn't...
by Kevin
Fri Mar 03, 2017 12:36 am
Forum: Help and Troubleshooting
Topic: arm stuck at lowest position
Replies: 14
Views: 8063

Re: arm stuck at lowest position

I did unplug it. There is a very slight difference when the power is on vs. off. When the power is off I can slightly wiggle the screw, when the power is on I cannot move it at all.