It took me two months to paid for the Solus in printing charges.
Thank you
Search found 68 matches
- Tue Dec 29, 2015 2:37 am
- Forum: General
- Topic: Thanks Solus
- Replies: 2
- Views: 6476
- Mon Dec 28, 2015 2:43 am
- Forum: Hardware
- Topic: Minium computer
- Replies: 6
- Views: 12110
Re: Minium computer
Yes always change to 42xy. This is best so fair and I changed to vista laptop, on this post it was a little better. It prints good at 25xy http://reify-3d.com/forum/viewtopic.php?f=11&t=108 Now am thinking I should of tried my good desktop. Before I purchase this one. After going to three differ...
- Sun Dec 27, 2015 11:04 pm
- Forum: Hardware
- Topic: Minium computer
- Replies: 6
- Views: 12110
Re: Minium computer
Ok, I will do you think it is the computer?
- Sun Dec 27, 2015 7:19 pm
- Forum: Hardware
- Topic: Minium computer
- Replies: 6
- Views: 12110
Re: Minium computer
Just read FAQ, but is this my problem with printing at 42xy
- Sun Dec 27, 2015 6:40 pm
- Forum: Hardware
- Topic: Minium computer
- Replies: 6
- Views: 12110
Minium computer
What is the minimum computer to run the Solus. I have it running on an old Pentium 4 with 2.5 gig rams. upgraded from XP to window 7 and newer Amd graphic card. Could this failures problems with trying to print 42xy. I don't have much problems at 25xy.
- Sun Dec 27, 2015 2:28 am
- Forum: Help and Troubleshooting
- Topic: 30
- Replies: 3
- Views: 7640
30
I have not been able to print at 42xy, so today I tried the 30z mic and after about 3 min the projector was not light up, the printer was moved, but the projector did not light. I tried 25z and the projector work,but still failing at the supports. Any ideals
- Sun Dec 27, 2015 2:17 am
- Forum: Resins
- Topic: Resin exposure
- Replies: 1
- Views: 5371
Resin exposure
Do we need to be changing the resin exposure time for different model if they are felling? Or should the same setting always work.
- Thu Dec 24, 2015 2:53 pm
- Forum: Help and Troubleshooting
- Topic: Connecting issues/ non responsivness
- Replies: 8
- Views: 13162
Re: Connecting issues/ non responsivness
I had the same problem last week. Three things I did were $x, check the clear log on the control, unplug the printer from the wall. This is strange part only after I pick it up and put it down then plug it back in did it work. I think there is a firmware update I was told
- Fri Dec 18, 2015 11:20 pm
- Forum: Resins
- Topic: New B9 Resins
- Replies: 38
- Views: 57665
Re: New B9 Resins
I believe you meant the bottom is 13000 not 1300 ;) If your size is off a bit, that means maybe you're overexposing. I would try to lower the layer exposure more. Looks good! My base support is wrong with cherry-under resin and over yellow resin, Do I play with bottom exposure or #bottom layer? My ...
- Fri Dec 18, 2015 9:06 pm
- Forum: Resins
- Topic: New B9 Resins
- Replies: 38
- Views: 57665
Re: New B9 Resins
xy 25 default and layer 25