Search found 68 matches
- Mon Oct 03, 2016 6:25 pm
- Forum: General
- Topic: B9 software
- Replies: 3
- Views: 6600
B9 software
Anyone have problem saving or running the B9 software. It will not save the as stl or it crash on two window 10 machine.
- Wed Jul 13, 2016 11:42 pm
- Forum: Resins
- Topic: SolusProto & Heat Cured Silicone Molds
- Replies: 3
- Views: 8422
Re: SolusProto & Heat Cured Silicone Molds
On the B9 resins, I use both castaldo pink can green, but the spray is the trick. Or a dry Teflon spray
https://www.riogrande.com/Product/Casta ... ray/701104
https://www.riogrande.com/Product/Casta ... lbs/701005
https://www.riogrande.com/Product/Casta ... ray/701104
https://www.riogrande.com/Product/Casta ... lbs/701005
- Fri Feb 26, 2016 11:32 pm
- Forum: Help and Troubleshooting
- Topic: support thickness
- Replies: 2
- Views: 5907
support thickness
If you are using posts for support what is diameter at base ? what is diameter at attached?
Thanks
Thanks
- Thu Feb 25, 2016 2:57 am
- Forum: Hardware
- Topic: Graphics Control Panel
- Replies: 1
- Views: 5225
Graphics Control Panel
In Intel graphics control panel if I go in color settings then click Infocus I see brightness contrast and gamma setting. What should they be?. It seem makes a different on the light on quartz
- Tue Feb 23, 2016 11:57 pm
- Forum: Help and Troubleshooting
- Topic: [SOLVED] Thin Base
- Replies: 7
- Views: 10936
Re: Thin Base
I first one is was mine, the second was yours. Just finished the print base still thin and it was cut off
- Tue Feb 23, 2016 8:39 pm
- Forum: Help and Troubleshooting
- Topic: [SOLVED] Thin Base
- Replies: 7
- Views: 10936
Re: Thin Base
The sample printed fine, yes I'm at full RBG, it was a new film. (Not now)
Yellow
Printing at I'm having better luck 25xy-25z
Exposure 2600
Bottom 18000
Printing at (getting cut off's) B9R Yellow 25xy-30z
Exposure 3300
Bottom 12000
Yellow
Printing at I'm having better luck 25xy-25z
Exposure 2600
Bottom 18000
Printing at (getting cut off's) B9R Yellow 25xy-30z
Exposure 3300
Bottom 12000
- Tue Feb 23, 2016 8:10 pm
- Forum: Help and Troubleshooting
- Topic: [SOLVED] Thin Base
- Replies: 7
- Views: 10936
Re: Thin Base
Do you think this is causing failure in the my prints?
- Tue Feb 23, 2016 6:21 pm
- Forum: Help and Troubleshooting
- Topic: [SOLVED] Thin Base
- Replies: 7
- Views: 10936
[SOLVED] Thin Base
Why are my base so thin .19mm. Only twice has it printed .5mm. In Yellow on Cherry.
- Sat Jan 09, 2016 7:35 pm
- Forum: Help and Troubleshooting
- Topic: Can i use the same pc for printing and CAD
- Replies: 3
- Views: 7768
Re: Can i use the same pc for printing and CAD
No need dedicated PC/LAPTOP, while printing
- Fri Jan 08, 2016 7:06 pm
- Forum: Help and Troubleshooting
- Topic: base
- Replies: 1
- Views: 5377
base
My base are not .5mm they are .29 .25 on a yellow and cherry. What do I need to change fix. Also does temperature affect the prints.