Success go to try more today and cast tomorrow.
My cherry print of this is size 9 and in yellow sIze 9.25 Model size 9.25 cad
My Base came out .9mm what is wrong and in cherry .25. My model is .50 how to I fix
expose 2380
bottom 1300
Search found 68 matches
- Fri Dec 18, 2015 5:48 pm
- Forum: Resins
- Topic: New B9 Resins
- Replies: 38
- Views: 57407
Re: Spot HT
They are for a customer, I'll post some pictures
- Wed Dec 16, 2015 10:43 pm
- Forum: Resins
- Topic: New B9 Resins
- Replies: 38
- Views: 57407
Re: New B9 Resins
Hopefully someone will have reliable prints and you'll have a good profile soon ... Ive frustrated myself quite a bit trying this the last couple of days ... That's the nature of trying to experiment with something new. Better stick with something that works for now. Are you having casting issues w...
- Wed Dec 16, 2015 10:10 pm
- Forum: Resins
- Topic: New B9 Resins
- Replies: 38
- Views: 57407
Re: New B9 Resins
Here is how I have it set up. I did have a small one print twice, the failure was flat to the build plate when printed.
Re: Spot HT
I have used Castaldo No-Shrink Pink on flat pieces, Castaldo VLT (Very Low Temperaoldture) sticks a little to the resin, but very easy to use 1 hour and I have a wax and Akron Two-Part RTV-RP Silicone Mold. In all great detail with VLT and RTV. better detail than if I cast first. I do a lot of charm...
New Resin
I add the yellow resin to CW and hit run, it would not return home to start to print. It started at the height it was. Did I miss something?
- Wed Dec 16, 2015 3:36 am
- Forum: Resins
- Topic: New B9 Resins
- Replies: 38
- Views: 57407
Re: New B9 Resins
I tried printing the cherry setting, i guess over exposed
- Wed Dec 16, 2015 12:15 am
- Forum: Resins
- Topic: New B9 Resins
- Replies: 38
- Views: 57407
Re: New B9 Resins
Received mine today. This is what I'm thinking If I can remember by math Cherry exposure factor 12.01765853 /25 =.480763412 per layer B9 This equals Solus 2800 ms 25 microns Yellow exposure factor 7.6410228 /20 =.382080114 per layer .382080114* 25 = 9.55202285 9.55202285 / 120165853 = .79483060915 a...
- Tue Dec 15, 2015 7:06 pm
- Forum: Help and Troubleshooting
- Topic: 42xy
- Replies: 5
- Views: 11092
Re: 42xy
Success in 25yx
- Tue Dec 15, 2015 6:44 pm
- Forum: Help and Troubleshooting
- Topic: Halo Split
- Replies: 19
- Views: 29059
Re: Halo Split
Things I do as I build Check Boolean Union then undo as I'm working. checking naked edges and no non-manifold edges as building When finished building-Boolean Union Command Selbadobjects Command SelOpenplysrf Mesh from Nurb Objects Commandselopenmesh check naked edges and no non-manifold edge, looki...