Search found 60 matches
- Fri Dec 14, 2018 7:22 am
- Forum: Hardware
- Topic: Lamp hours/exposure time ratio
- Replies: 8
- Views: 23898
Re: Lamp hours/exposure time ratio
I believe the lighter blue was the first batch. I got some of the first run. The darker blue was the second batch I got. Just got some new SW, but have not opened it yet. They keep trying to refine it. Ok, good to know. Are Contour setting still same in light or dark blue or do I need to change them?
- Thu Dec 13, 2018 4:49 pm
- Forum: Hardware
- Topic: Lamp hours/exposure time ratio
- Replies: 8
- Views: 23898
Re: Lamp hours/exposure time ratio
I dont know what he means by lighter SW and Darker SW , does he mean to say sloucast ( darker ) or is there a new formulation of SW ? I have two different SolusWax, light blue and dark blue. Dark one is from july 2018 patch and light one is few months old. Both are SolusWaxes and same reseller. I t...
- Thu Dec 13, 2018 3:13 pm
- Forum: Help and Troubleshooting
- Topic: Delicate parts seem to fail the most
- Replies: 4
- Views: 7882
Re: Delicate parts seem to fail the most
Original or replacement bulb?
- Thu Dec 13, 2018 6:02 am
- Forum: Hardware
- Topic: Lamp hours/exposure time ratio
- Replies: 8
- Views: 23898
Re: Lamp hours/exposure time ratio
mongerdesigns wrote:Who's your reseller? Please contact them for help. Might be the resin has gone bad.
Resin is less than 3 weeks old. Its light blue SolusWax. Print also faliled old, darker SolusWax.
Reseller is Micron3D/Jordi. I will contact him.
- Wed Dec 12, 2018 8:42 am
- Forum: Hardware
- Topic: Lamp hours/exposure time ratio
- Replies: 8
- Views: 23898
Lamp hours/exposure time ratio
Just wondering what is "normal" lamp hours versus exposure time.
Mine is 5 month old machine and about 345h and exposure time Z30 is 17sec. Less than that I get failed prints. SolusWax.
Can you share you lamp hours/exposure time ratio and what resin you use.
E: lamp hours 345h
Mine is 5 month old machine and about 345h and exposure time Z30 is 17sec. Less than that I get failed prints. SolusWax.
Can you share you lamp hours/exposure time ratio and what resin you use.
E: lamp hours 345h
- Wed Oct 17, 2018 3:54 pm
- Forum: Casting
- Topic: Casting Issue: Gas Porosity?
- Replies: 4
- Views: 15259
Re: Casting Issue: Gas Porosity?
What resin?
- Wed Oct 17, 2018 4:52 am
- Forum: Help and Troubleshooting
- Topic: Failed prints
- Replies: 3
- Views: 6440
Re: Failed prints
Who did you get the printer from? I suggest contacting them, so they can help you do some diagnostics and check everything with your setup. Its from Jordi and he is helping me with this. Just wanted to make thread coz this might help somebody else with similar problems. Jordi´s support has been gre...
- Tue Oct 16, 2018 6:33 am
- Forum: Help and Troubleshooting
- Topic: Failed prints
- Replies: 3
- Views: 6440
Failed prints
Recently I have had failed prints. I have calibrated print plate several times (used 0,06mm, 0,10mm, 0,11, 0,13 paper and old film) and replaced film. Computer settings are ok (RGB etc.). No automatic updates. I have tried different thumbscrew "settings", even fully loosen (so no tigntenin...
- Mon Oct 15, 2018 2:25 pm
- Forum: Resins
- Topic: Power Resins (castable resins)
- Replies: 2
- Views: 10916
Power Resins (castable resins)
Anyone tried yet?
https://powerresins.com/
https://powerresins.com/
- Fri Aug 17, 2018 7:12 am
- Forum: Resins
- Topic: SolusWax Tips and Tricks
- Replies: 21
- Views: 50908
Re: SolusWax Tips and Tricks
Here are some helpful tips for the SolusWax resin: Software and Resin Profile Download the latest software update in order to access the SolusWax resin profile. Inside Contour, under the HELP menu, check for the latest update, install it and restart Contour. The new resin profile for SolusWax shoul...