Search found 28 matches
- Wed May 09, 2018 11:40 am
- Forum: Resins
- Topic: SolusCast: Cracks in heavy model
- Replies: 116
- Views: 159902
Re: SolusCast: Cracks in heavy model
epic m.....
- Tue Apr 24, 2018 9:32 pm
- Forum: Resins
- Topic: SolusCast: Cracks in heavy model
- Replies: 116
- Views: 159902
Re: SolusCast: Cracks in heavy model
I cut off the hard to reach support of 0.5mm drills .... Side edge ...
I do it under the microscope and can be very precise to cut off the support
I do it under the microscope and can be very precise to cut off the support
- Tue Feb 13, 2018 10:58 pm
- Forum: Casting
- Topic: Casting SolusCast
- Replies: 202
- Views: 298161
Re: Casting SolusCast
We don't suggest curing SC resin using regular UV nail boxes. UV nailbox bulbs are at 365nm. SC needs 405nm light. At least 30-50w, as close as possible to the model, curing for 3-5 hours depending on size and thickness of the model. certainly not enough to 99% result ..... I tried 405nm and 100w w...
- Tue Jan 30, 2018 10:00 pm
- Forum: General
- Topic: LED light cure time
- Replies: 4
- Views: 9087
Re: LED light cure time
mongerdesigns wrote:3-4 hours
3-4hours??
I use a 400watt UVbulb and cure 12h .....
- Fri Oct 13, 2017 2:18 pm
- Forum: Casting
- Topic: Casting SolusCast
- Replies: 202
- Views: 298161
Re: Casting SolusCast
@wiliams....you also tried Epic M... SC also prints as well or even better?
- Fri Sep 22, 2017 7:01 am
- Forum: Casting
- Topic: Casting SolusCast
- Replies: 202
- Views: 298161
Re: Casting SolusCast
rsaldivar wrote:I thought that was done in the begging of this thred ?
did you watch that video in my post?
so i meant to burn those two rings .....
to find out how much ash is in it ....
sorry for my english
- Thu Sep 21, 2017 10:13 pm
- Forum: Casting
- Topic: Casting SolusCast
- Replies: 202
- Views: 298161
Re: Casting SolusCast
can anyone please do such a test with B9 green and SC. ?
ttps://www.youtube.com/watch?time_conti ... qUwoREE-oY
burn the same ring with B9 and SC.
and publish the video here?
Thanks
ttps://www.youtube.com/watch?time_conti ... qUwoREE-oY
burn the same ring with B9 and SC.
and publish the video here?
Thanks
- Wed Sep 13, 2017 2:09 pm
- Forum: Resins
- Topic: Bluecast resin
- Replies: 2
- Views: 7118
Re: Bluecast resin
I bought one of the first pieces.
absolute disaster.
very badly printed and also badly cast....there is so much ash.
these companies have a modern alchemist .... it's worth the money.
but if you will have good results I will be very happy ....i have 750ml....
absolute disaster.
very badly printed and also badly cast....there is so much ash.
these companies have a modern alchemist .... it's worth the money.
but if you will have good results I will be very happy ....i have 750ml....
- Sun Sep 10, 2017 5:27 pm
- Forum: Casting
- Topic: Casting SolusCast
- Replies: 202
- Views: 298161
Re: Casting SolusCast
I used plasticast but I only went up to 1375 for 2.75 hours. I cast 10k, 14k and silver. The silver flask had 10 items 1.5 mm thick. Every one of the pieces was a total loss. The imperfections were all below the original surface which means they were all the result of ash. If the investment had bro...
- Sun Sep 10, 2017 4:26 pm
- Forum: Resins
- Topic: SENERTEK castable resin ?
- Replies: 8
- Views: 20083
Re: SENERTEK castable resin ?
I still have half a bottle at home ..... it is well printed, but it is not good to cast well because it has many ashes. it's a waste of time .... but if you do well to burn it so please let me know at least I use half a bottle .... :-) I've tested senertek, bluecast, FTD deepblack, Epic M .... the...