Just got my green resin. Printed great but sill some issue. I'm finding that depending on where my model is place on build platform is weather I get a fail or not.
First print
Second place back on platform
Search found 787 matches
- Sat Jan 23, 2016 8:32 pm
- Forum: Gallery
- Topic: MikeT's Prints
- Replies: 15
- Views: 23745
- Fri Jan 22, 2016 2:59 am
- Forum: Gallery
- Topic: Prints by Monger
- Replies: 173
- Views: 377037
Re: Prints by Monger
So is that the Solus Resin?
Looking good.
Looking good.
- Thu Jan 21, 2016 4:39 am
- Forum: Resins
- Topic: B9 Emerald Castable Resin Testing
- Replies: 22
- Views: 65985
Re: B9 Emerald Castable Resin Testing
I should receive my Green resin Friday. Hopefully be able to print with it this weekend.
- Mon Jan 18, 2016 5:36 pm
- Forum: Help and Troubleshooting
- Topic: CW doesn't see driver
- Replies: 3
- Views: 7291
Re: CW doesn't see driver
check your settings in control panel - device manager. Be sure the usb port is set to never go to sleep.
Should not have to unplug - re-plug.
Should not have to unplug - re-plug.
- Wed Jan 13, 2016 3:48 am
- Forum: Help and Troubleshooting
- Topic: Mis prints
- Replies: 51
- Views: 71750
Re: Mis prints
Did a print today and it came out great. That is after I fixed my settings for the display adapter. Thanks for suggesting Emil. Figured it was going to be computer related. I swear a ghost lives in Windows 10. Not only where mys settings changed, but Cortana switched back on. I have tried to disable...
- Wed Jan 13, 2016 3:39 am
- Forum: Hardware
- Topic: My Solus printer is not recognised by any computer ( 5 -so far )
- Replies: 2
- Views: 6562
Re: My Solus printer is not recognised by any computer ( 5 -so far )
Sounds like your USB port got turned off. Check in your Device Manager to see if the ports are loaded. Check your USB cable is good.
Does it see your projector?
Does it see your projector?
- Mon Jan 11, 2016 3:31 am
- Forum: Help and Troubleshooting
- Topic: Mis prints
- Replies: 51
- Views: 71750
Re: Mis prints
Yes it went through netfab.
- Sun Jan 10, 2016 10:37 pm
- Forum: Help and Troubleshooting
- Topic: Mis prints
- Replies: 51
- Views: 71750
Re: Mis prints
Will check to see if my settings got changed somehow.
After getting to top of the table clean I notice the underside also had a film on it along with the mirror. Had some resin seep inside and guessing the fumes cause the residue. All clean now.
After getting to top of the table clean I notice the underside also had a film on it along with the mirror. Had some resin seep inside and guessing the fumes cause the residue. All clean now.
- Sun Jan 10, 2016 3:01 pm
- Forum: Tips and Tutorials
- Topic: File Uploads
- Replies: 2
- Views: 6855
Re: File Uploads
If you use a cloud service like Dropbox, you would upload your file to it and post a link to the file. In your Dropbox folder on your computer, highlight file and right click. Should be a "Share Dropbox file". Don't see a way to upload file here.
- Sun Jan 10, 2016 2:46 pm
- Forum: Help and Troubleshooting
- Topic: Mis prints
- Replies: 51
- Views: 71750
Re: Mis prints
So what can I use to get it off the quartz. I tried a little dawn on damp pec pad. Followed by alcohol l. Still a little film/residue.
Also would this be why it printed the whole gird?
Also would this be why it printed the whole gird?