Those things are on the list of things to do. Both a manual and a video that shows how the grid adjustment works.
Fortunately Contour is easy enough to use (that was the goal) that most things are self explanatory.
For the grid adjustment, the last two controls adjust coefficients and their function is largely based on the other values such as the center of the distortion (x,y).
A video will better illustrate this, and it's planned.
Solus Contour Grid Adjustments
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Solus Contour Grid Adjustments
..ok, this information helps a lot. I got straight lines left and right and also on top. But the bottom line is bent up about 1.5 mm. So I try to shift the distortion down. Lets see if it works.
Re: Solus Contour Grid Adjustments
I am using a Vivitech hd 1188 !
please send me too!
thanks a lot!
please send me too!
thanks a lot!
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Solus Contour Grid Adjustments
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 4 guests