Procedure or Check List for 25 to 41 and back again.

Postby **mongerdesigns** » Tue Nov 17, 2015 12:05 am

Just measure how much you need to move it, then point the projector at the wall and move it from the menu in that direction. The horizontal shift is limited to about 50 pixels to the left or to the right, so it's not a huge move.

Jewelermdt · Postby **Jewelermdt** » Tue Nov 17, 2015 4:24 am

Will try that. I don't have a whole lot of room between projector to wall. Right now it's 15in laptop projector printer. Just enough room to open printer lid and not hit wall. I run a fan to keep things cool.

GAR62 · Postby **GAR62** » Tue Nov 17, 2015 10:14 pm

Hi
Could you please send me the instructions on this subject as well? Thanks---------------Gary

Postby **reify** » Wed Nov 18, 2015 4:46 am

Hi,

PMed them to you.

gemmark · Postby **gemmark** » Thu Nov 19, 2015 3:19 pm

Hi all, i'm new here and getting ready to purchase a Solus. Sooo, I would like to get this instructions just to start and familiarise myself with the unit. Actually any info a noob should know, please feel free to send it.

All the best,

Mark

Archerm · Postby **Archerm** » Mon Dec 28, 2015 7:44 pm

Might as well send me a copy as well. I have a few larger pieces to print in the near future. Thanks Mark

Postby **mongerdesigns** » Mon Dec 28, 2015 8:12 pm

Just added the guide in the Private forum.
viewtopic.php?f=13&t=122

Locking this thread down.

Procedure or Check List for 25 to 41 and back again.

Re: Procedure or Check List for 25 to 41 and back again.

Re: Procedure or Check List for 25 to 41 and back again.

Re: Procedure or Check List for 25 to 41 and back again.

Re: Procedure or Check List for 25 to 41 and back again.

Re: Procedure or Check List for 25 to 41 and back again.

Re: Procedure or Check List for 25 to 41 and back again.

Who is online