baldwini ,
so which one is the pic you posted , how much and where to buy ??
or what do you recommend ?
how long is your curing of 20 - 50 rings ?
Curing Unit
Re: Curing Unit
I received a mailer from Gesswein showcasing the new Formlabs Cure device.
http://www.gesswein.com/p-12991-formlabs-form-cure.aspx
Doesn't have the vacuum feature, but it will rotate the model and will heat up the chamber to 80°C.
Not sure if $699 is a good deal, but maybe there is a coupon or something.![Wink ;-)](./images/smilies/icon_e_wink.gif)
http://www.gesswein.com/p-12991-formlabs-form-cure.aspx
Doesn't have the vacuum feature, but it will rotate the model and will heat up the chamber to 80°C.
Not sure if $699 is a good deal, but maybe there is a coupon or something.
![Wink ;-)](./images/smilies/icon_e_wink.gif)
Re: Curing Unit
rsaldivar wrote:baldwini ,
so which one is the pic you posted , how much and where to buy ??
or what do you recommend ?
how long is your curing of 20 - 50 rings ?
This unit is my design, and is created by me. I use one of them myself, this curing machine is good for high volume orders if you have 20-50 rings at once. It takes 5-10 minutes to cure. I build this machine only by order - I just sold out of the machine to a large casting company for $3500. It takes me about 3 months to build this machine. This machine is not suited for people who cure 3-5 models, There are many curing machines on the market, everybody tries make it cheaper but the final outcome is a little better than nail dryer......If you buy pulsing curing machine that is fine, it does not work that bad, has small chamber and sells for about same price $3500
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Curing Unit
And this is a Solus forum. Advertising is not allowed.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Curing Unit
th7DGGSRGD.jpg
I meant this one ?
I meant this one ?
Re: Curing Unit
Yes this is pulsing curing machine you can use to cure models from SOLUS printerrsaldivar wrote:th7DGGSRGD.jpg
I meant this one ?
Re: Curing Unit
what is the company name and model num. for this one ??
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Curing Unit
Roger,
If you want information about a competitor's product, please send him a private message. We don't want that stuff posted in the forum.
If you want information about a competitor's product, please send him a private message. We don't want that stuff posted in the forum.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Curing Unit
rkundla wrote:I think someone suggested a coffee can with the LED light strips wrapped around it would be a good and relatively inexpensive solution too.
I made one. It takes a REAL long time to properly cure the emerald material. It probably takes 1.5 to 2 hours for a good casting. And my can gets really hot. Believe it or not those UV-LED strip lights throw some heat!!
Re: Curing Unit
after everything Iv read , I think its the heat that does the help in the prep for casting , not so much the light ( heat relieves stress in the resin ) different resins require different heat temp.'s . but all need to relieve the stress threw heat , I think for waxcast (MJ) its 120-150 F , and the emerald , Iv herd it anywhere from 200 - 250 F about 2 hours or so , dependent on resin and thickness too . or you can boil the emerald for 10 min. , I think the whole boiling process takes about an hours from room temp to boil - from boil to about 150 F then tree and cast , NO UV at all
Who is online
Users browsing this forum: No registered users and 100 guests