Grid calibration help

This section is for specific instructions for daily operations of the Solus printer and for troubleshooting. User submitted tips, etc. should go in the "Tips and Tutorials" section.
ketaeca
Novice
Posts:14
Joined:Sun Aug 20, 2017 10:13 am
Grid calibration help

Postby ketaeca » Wed Oct 04, 2017 7:40 pm

The back end is stretched and when I streigh it the front end gets stretched. Thats on default should I change the contour settings or the keystone feature on the vivitek.
Attachments
IMG_20171004_133354.jpg
IMG_20171004_133359.jpg
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Grid calibration help

Postby mongerdesigns » Wed Oct 04, 2017 8:35 pm

Watch the video again and follow the steps.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
printcast
Solus Expert
Posts:157
Joined:Fri Oct 09, 2015 2:38 pm

Re: Grid calibration help

Postby printcast » Mon Oct 30, 2017 11:37 am

Where are those videos found? I haven't needed help in a long time but my bottom horizontal grid line has a bow that I can not get straight without throwing other things off.
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: Grid calibration help

Postby Jewelermdt » Tue Oct 31, 2017 1:00 am

User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Grid calibration help

Postby mongerdesigns » Tue Oct 31, 2017 2:40 am

We are planning a big update in a few days. Super easy and accurate grid adjustment. Stay tuned.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
reify
Site Admin
Posts:571
Joined:Mon Mar 16, 2015 6:10 pm

Re: Grid calibration help

Postby reify » Tue Oct 31, 2017 11:46 am

This should make a lot of people happy :)
samatheang
Solus Expert
Posts:197
Joined:Wed Feb 17, 2016 10:36 pm

Re: Grid calibration help

Postby samatheang » Tue Oct 31, 2017 11:50 pm

:o :) :D It will of course make everyone happy, especially me. ;)
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: Grid calibration help

Postby Jewelermdt » Wed Nov 01, 2017 1:17 am

Right there with you. Can't wait.
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Grid calibration help

Postby mongerdesigns » Wed Nov 01, 2017 10:32 pm

We have released version 1.8 that has the new and improved grid adjustment system. It makes it super easy to make the grid perfect and get rid of all distortion.

Simply drag the points and see the grid being adjusted in real-time.

It also includes a PDF of the grids that can be printed on a piece of paper for exact alignment of the grid.

We will update the videos and instructions in a few days to reflect these new changes.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
printcast
Solus Expert
Posts:157
Joined:Fri Oct 09, 2015 2:38 pm

Re: Grid calibration help

Postby printcast » Thu Nov 02, 2017 11:17 am

That sounds PERFECT!

Who is online

Users browsing this forum: No registered users and 8 guests