Print Error 2 hrs into print

This section is for specific instructions for daily operations of the Solus printer and for troubleshooting. User submitted tips, etc. should go in the "Tips and Tutorials" section.
User avatar
Just Bob
Novice
Posts:72
Joined:Fri Mar 25, 2016 4:37 pm
Re: Print Error 2 hrs into print

Postby Just Bob » Sat Apr 07, 2018 1:45 pm

Len Klutts says he had similar problem...moved printer USB to another port.

I did that and it seems to be working....keep you posted!


Bob
User avatar
Just Bob
Novice
Posts:72
Joined:Fri Mar 25, 2016 4:37 pm

Re: Print Error 2 hrs into print

Postby Just Bob » Sat Apr 07, 2018 9:35 pm

Well, got a great print on the retry model I was having problems with.

UNTIL....I tried another set of models right afterward
One layer then all the way up and stopped.


I Cleared out, restarted, etc.....Got THIS ERROR message when I tried again.

Getting behind on my work a little bit now...

ANY help would be appreciated!

THANKS!

Bob
Attachments
2018-04-07 17.27.06.jpg
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: Print Error 2 hrs into print

Postby Jewelermdt » Sun Apr 08, 2018 3:36 am

Check your ports in Device Manager. Under USB double click on them. Change the setting. Un-check the box if Checked. You want these to be always power on. I'm on home computer so my box is checked.
DeviceManUSB.JPG
User avatar
Just Bob
Novice
Posts:72
Joined:Fri Mar 25, 2016 4:37 pm

Re: Print Error 2 hrs into print

Postby Just Bob » Mon Apr 09, 2018 2:14 pm

Mike,

Thanks for the help! I unchecked the boxes in power mgmt for USB. Got a good print after restart. THEN ANOTHER ERROR message. see pic

SHould I do an uninstall/reinstall or something?

4 days of inconsistent printing , tweaking between prints is not working very well.

ANY WORD from your tech guy, Emil?

Bob
Attachments
2018-04-09 10.02.25.jpg
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Print Error 2 hrs into print

Postby mongerdesigns » Mon Apr 09, 2018 4:37 pm

Do you hear a disconnect sound when you touch the machine? It's possible that this is static related. Try discharging by touching something metal before touching the printer.

Unplug the usb from the back, run the homing cycle again. Before putting on the build plate and the resin tank, make sure to discharge. I've seen this happen when the customer had linoleum floors and the air was dry, so there was lots of static being generated.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: Print Error 2 hrs into print

Postby Jewelermdt » Tue Apr 10, 2018 3:24 am

That last message sounds like a memory problem, or disk problem. Is your file in a folder on the computer? Or on a flash-drive? If that happen mid print, i'm guessing it's looking for the file and it's gone. Or can't access it.


Go look at what this code means. About what I said.

http://www.wiki-errors.com/wiki-errors. ... 0x80070002
norbertwebb
Posts:1
Joined:Sat May 25, 2019 4:54 pm

Re: Print Error 2 hrs into print

Postby norbertwebb » Sat May 25, 2019 4:57 pm


Who is online

Users browsing this forum: No registered users and 6 guests