Bad prints

This section is for specific instructions for daily operations of the Solus printer and for troubleshooting. User submitted tips, etc. should go in the "Tips and Tutorials" section.
Coreygulerian
Posts:1
Joined:Sun Jun 10, 2018 11:20 pm
Bad prints

Postby Coreygulerian » Sun Jun 10, 2018 11:41 pm

Hi
I have been getting these kind of prints all weekend not sure what I need to do to fix or doing wrong please help
Attachments
4251F37B-AE18-4A8E-A47E-D40AFE6C22D5.jpeg
E2B909CD-33CD-400F-9973-C76E3A471FE7.jpeg
91219DF2-F220-4938-8DD2-BB1BB47B8897.jpeg
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Bad prints

Postby mongerdesigns » Sun Jun 10, 2018 11:55 pm

Check your graphics cards rgb settings. It’s in the setup instructions.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: Bad prints

Postby Jewelermdt » Mon Jun 11, 2018 1:44 am

You also have that platform too crowded. Support won't print if they are off the grid. Make sure all parts are at least one square inside of the grid for the support base.

As Emil said and did you calibrate the build platform to the quartz table?
lklutts
Solus Expert
Posts:124
Joined:Thu Jul 16, 2015 8:48 pm

Re: Bad prints

Postby lklutts » Mon Jun 11, 2018 1:36 pm

WIndows updates have been changing RGB settings on computers. Also run them through netfab. I have had models run twice through mesh repair and it didnt work. Netfabb fixedd it. Len
robin
Solus Expert
Posts:144
Joined:Wed Sep 23, 2015 3:03 pm

Re: Bad prints

Postby robin » Tue Jun 12, 2018 2:27 am

Wear gloves!
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: Bad prints

Postby rsaldivar » Tue Jun 12, 2018 3:54 pm

not clear from pic , but cant those be printed flat with no supports ??
User avatar
exedebee
Solus Expert
Posts:128
Joined:Fri Feb 12, 2016 3:39 am

Re: Bad prints

Postby exedebee » Wed Jun 13, 2018 1:53 am

I think Full RGB issue.
User avatar
hx19035
Novice
Posts:91
Joined:Thu Feb 18, 2016 5:48 pm
Location:USA
Contact:

Re: Bad prints

Postby hx19035 » Wed Jul 25, 2018 7:04 pm

robin wrote:Wear gloves!


Yes. THAT!

Who is online

Users browsing this forum: No registered users and 8 guests