Just had a problem with the hard drive for my Solus Laptop. Had to re install everything. Everything works fine but when the projector starts up there is an extra projection that goes away as soon as you start the print wizard, but it is strong enough to cure the material in the tank.
Seems like a setting I missed.
Anyone ???
Extra lights
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Extra lights
Turn off the taskbar for all displays. It’s in the instructions.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Extra lights
Thank You
Just as a point of information the instructions specify to do this if using Windows 8
Just as a point of information the instructions specify to do this if using Windows 8
Who is online
Users browsing this forum: No registered users and 84 guests