Extra lights

This section is for specific instructions for daily operations of the Solus printer and for troubleshooting. User submitted tips, etc. should go in the "Tips and Tutorials" section.
Post Reply
Dave D
Novice
Posts:31
Joined:Tue Aug 23, 2016 1:36 am
Location:Watertown, MA
Contact:
Contact Dave D
Extra lights

Postby Dave D » Thu Aug 30, 2018 2:46 am

Just had a problem with the hard drive for my Solus Laptop. Had to re install everything. Everything works fine but when the projector starts up there is an extra projection that goes away as soon as you start the print wizard, but it is strong enough to cure the material in the tank.

Seems like a setting I missed.

Anyone ???
Attachments
2018-08-29 21.31.35sm.jpg
Top
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:
Contact mongerdesigns

Re: Extra lights

Postby mongerdesigns » Thu Aug 30, 2018 3:57 am

Turn off the taskbar for all displays. It’s in the instructions.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Top
Dave D
Novice
Posts:31
Joined:Tue Aug 23, 2016 1:36 am
Location:Watertown, MA
Contact:
Contact Dave D

Re: Extra lights

Postby Dave D » Thu Aug 30, 2018 11:09 am

Thank You

Just as a point of information the instructions specify to do this if using Windows 8
Top
Post Reply

Return to “Help and Troubleshooting”

Who is online

Users browsing this forum: No registered users and 9 guests