Hey there,
Just looking for some input I keep getting print fails with b9 green. Any help would help.
Print fails
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Print fails
Email me your scene file with supports. This looks like a supports issue. Info@junction3d.com
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Print fails
I saw some flashing. can you check Full RGB on graphic card .
Re: Print fails
mongerdesigns wrote:Email me your scene file with supports. This looks like a supports issue. Info@junction3d.com
Hey there.
Did you receive my email?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Print fails
Sorry, no.
Maybe put a dropbox link here?
Maybe put a dropbox link here?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Print fails
exedebee wrote:I saw some flashing. can you check Full RGB on graphic card .
where do i find these settings?
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: Print fails
Right click on your desktop. Graphic Card properties. Depends on what graphics card you have. Look at your manual for setup. It's explained
Re: Print fails
Jewelermdt wrote:Right click on your desktop. Graphic Card properties. Depends on what graphics card you have. Look at your manual for setup. It's explained
It goes to the intel graphics and media control panel. its not like it shows in the manual
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Print fails
How is it then? Post a photo.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 83 guests