I got lines on my results.

[duahduah]

Hi I'm solus 3d printer user.

I had a trouble with the light power of projector.
I turned down the brightness option in projector more than manual.
So I solved the layer spread but I have another issue now.
I got the lines of my printing results.
I securely printed and there was no interference.
I don't know this is about hardware issue or software issue.

desperately I need a solution about this.

thank you.

[mongerdesigns]

1. Make sure your projector settings are correct (from the projector menu using the remote).

2. Update to the latest beta of the software (you can enable beta downloads from EDIT, PREFERENCES, then check for update under the HELP menu)

3. Go into the resin Profile settings and select the SolusProto resin, then click the RESET button. This will update to the latest resin profile.

4. Do a small test print. If you get flashing, lines, or the details are not sharp, you can use the Light Intensity slider and move it down a bit. Then test again.