shifted layers everytime after 1cm

This section is for specific instructions for daily operations of the Solus printer and for troubleshooting. User submitted tips, etc. should go in the "Tips and Tutorials" section.
Christian K.
Novice
Posts:47
Joined:Thu Sep 29, 2016 8:01 pm
shifted layers everytime after 1cm

Postby Christian K. » Thu Jan 24, 2019 5:07 pm

Hello everyone.

We are very happy with our solus.
Sadly we recognized shifted layer - everytime at the same hight.It looks like that the projector exposes longer for this certain layer - Is that possible.
How could i solve this issue?

Best regards
Christian
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: shifted layers everytime after 1cm

Postby mongerdesigns » Thu Jan 24, 2019 5:10 pm

Have you checked your full rgb settings?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Christian K.
Novice
Posts:47
Joined:Thu Sep 29, 2016 8:01 pm

Re: shifted layers everytime after 1cm

Postby Christian K. » Thu Jan 24, 2019 5:47 pm

we have a windows notebook - where i can check this, and what has to be selected ?

Thank you for your quick reply !
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: shifted layers everytime after 1cm

Postby mongerdesigns » Thu Jan 24, 2019 6:38 pm

It's in the solus setup instructions.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Christian K.
Novice
Posts:47
Joined:Thu Sep 29, 2016 8:01 pm

Re: shifted layers everytime after 1cm

Postby Christian K. » Thu Jan 24, 2019 11:39 pm

is it possible to send me this sheet ?

We got the notebook and the solus already with all settings.
I would have to wait till next week, because i have no idea where the setup-informations are.

Who is online

Users browsing this forum: No registered users and 9 guests