Additional lines in build that werent in stl

This section is for specific instructions for daily operations of the Solus printer and for troubleshooting. User submitted tips, etc. should go in the "Tips and Tutorials" section.
Post Reply
wildtrout
Novice
Posts:15
Joined:Tue Feb 09, 2016 11:57 pm
Additional lines in build that werent in stl

Postby wildtrout » Sun Feb 14, 2016 12:15 am

[Hi guys
Just started to print a wedder on its side and noticed more lines being printed that arent in the file. Any ideas why? Many thanks
Attachments
20160214_111101.jpg
Top
User avatar
reify
Site Admin
Posts:571
Joined:Mon Mar 16, 2015 6:10 pm

Re: Additional lines in build that werent in stl

Postby reify » Sun Feb 14, 2016 12:20 am

In my experience that's from a bad mesh...did you run it through Netfabb?
Top
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:
Contact mongerdesigns

Re: Additional lines in build that werent in stl

Postby mongerdesigns » Sun Feb 14, 2016 2:21 am

Yup. Bad mesh.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Top
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:
Contact Jewelermdt

Re: Additional lines in build that werent in stl

Postby Jewelermdt » Sun Feb 14, 2016 2:25 am

You don't need that big flat base. Just use the one supporting the ring. Also have the base of those supports about 1.2 to 2mm in diameter.
Top
Post Reply

Return to “Help and Troubleshooting”

Who is online

Users browsing this forum: No registered users and 77 guests