Thin layer on built platform

This section is for specific instructions for daily operations of the Solus printer and for troubleshooting. User submitted tips, etc. should go in the "Tips and Tutorials" section.
Post Reply
User avatar
CHAMAL
Novice
Posts:52
Joined:Fri Mar 31, 2017 12:45 pm
Location:srilanka
Contact:
Contact CHAMAL
Thin layer on built platform

Postby CHAMAL » Fri Mar 31, 2017 3:29 pm

HI
This thin layer sometimes fall into resin tank..even it will damage the surface of platform when cleaning..

i tried already changing the settings Exposure 80x45 - All 2.1 bottom 5

any tips?
W.A Chamal .S .Jayaratna
Jewelery CAD Designer
Jewellery Master model solution consultant
WEB - http://www.eoncadcam.com
Top
User avatar
Archerm
Solus Master
Posts:599
Joined:Mon Oct 26, 2015 1:57 pm
Location:North Carolina

Re: Thin layer on built platform

Postby Archerm » Fri Mar 31, 2017 5:04 pm

Any photos? Might need more support in that area.
Top
User avatar
CHAMAL
Novice
Posts:52
Joined:Fri Mar 31, 2017 12:45 pm
Location:srilanka
Contact:
Contact CHAMAL

Re: Thin layer on built platform

Postby CHAMAL » Sun Apr 02, 2017 2:54 am

check
Attachments
0077.jpg
W.A Chamal .S .Jayaratna
Jewelery CAD Designer
Jewellery Master model solution consultant
WEB - http://www.eoncadcam.com
Top
User avatar
CHAMAL
Novice
Posts:52
Joined:Fri Mar 31, 2017 12:45 pm
Location:srilanka
Contact:
Contact CHAMAL

Re: Thin layer on built platform

Postby CHAMAL » Sun Apr 02, 2017 3:01 am

this full platform
Attachments
17622051_10154490075780835_3895670003497125178_o.jpg
W.A Chamal .S .Jayaratna
Jewelery CAD Designer
Jewellery Master model solution consultant
WEB - http://www.eoncadcam.com
Top
barth
Novice
Posts:54
Joined:Sun Nov 27, 2016 5:52 pm

Re: Thin layer on built platform

Postby barth » Mon Apr 03, 2017 9:08 am

You over expose the initial layer
Top
User avatar
CHAMAL
Novice
Posts:52
Joined:Fri Mar 31, 2017 12:45 pm
Location:srilanka
Contact:
Contact CHAMAL

Re: Thin layer on built platform

Postby CHAMAL » Mon Apr 03, 2017 2:44 pm

what i have to do?
W.A Chamal .S .Jayaratna
Jewelery CAD Designer
Jewellery Master model solution consultant
WEB - http://www.eoncadcam.com
Top
barth
Novice
Posts:54
Joined:Sun Nov 27, 2016 5:52 pm

Re: Thin layer on built platform

Postby barth » Mon Apr 03, 2017 2:56 pm

You have to reduce the time of your "Initial Layer Exposure", this time depend on your projector power. For my Vivitek it's around 3s but you can put more to be sure it will stay on the build plate.
Top
User avatar
CHAMAL
Novice
Posts:52
Joined:Fri Mar 31, 2017 12:45 pm
Location:srilanka
Contact:
Contact CHAMAL

Re: Thin layer on built platform

Postby CHAMAL » Mon Apr 03, 2017 3:03 pm

I HAVE Vivitek 1188 Can you share me some settings ? pls
Im always printing trough 80x45 mm platform
Last edited by CHAMAL on Mon Apr 03, 2017 3:05 pm, edited 1 time in total.
W.A Chamal .S .Jayaratna
Jewelery CAD Designer
Jewellery Master model solution consultant
WEB - http://www.eoncadcam.com
Top
Post Reply

Return to “Help and Troubleshooting”

Who is online

Users browsing this forum: No registered users and 100 guests