Hi All,
I recently purchased a Solus and in the process of setting up , when I go to File- setup- project grid. I have this message. Any help is appreciated
Thank you
Peter
New Solus User
-
- Posts:8
- Joined:Fri Oct 20, 2017 2:40 am
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: New Solus User
Make sure your projector has been setup correctly in windows. It's all in the instructions.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: New Solus User
I get this sometimes. It depends on how things are turned on-off. If the projector is turned on after Contour is started it doesn't see it always. Or if auto shut off is click and you go print again and turn on the projector. Try clicking connect to controller, next time it happens.
Re: New Solus User
I get that only when the projector has been auto-turned on by Contour when trying to home. If you turn your PC on, and manually turn on the projector BEFORE you open Contour, you won't get that message. However, you can ignore that message and just hit print again and it should work fine afterwards.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: New Solus User
It takes time for windows to register that the projector is turned on. It's always best to turn on the projector by pressing the power button right before you plan on printing. That way, you can avoid that delay.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 83 guests