Reify3D Forum

happy but frustrated user with the solus because I am unable to make a beautiful prints without visible lines on the model since I received the machine 2 weeks ago. I print in 42 xy and 25 z
I redid the calibration several times but nothing works and it's worse and worse.
I know this machine is capable of wonders but for now it's rather sadness and desolation on my side. Is the model problematic? This one is hollow and I checked and try differents ones. Film tension? The machine is new so I do not think that's the problem. If anyone has an idea please because I block completely thank you !!!

Hello my friend

The picture is not very clear
But
If i could guess. The lines is pretty thick almost like a whole bunch of layer is shifting.

Hi,

There seems to be massive overcure on your support tips so please check you have selected the correct resin profile. This was printed at 42XY?

Thanks you for your answers. Jordi is helping me right now to solve this issues.

Did this get solved?

It is frustrating. Its been two weeks for the OP... I've been unable to rid myself of the lines for two years.

Hi Joe,

Please repost your picture.

Are you using the proto resin? Have you tried the turbo mode? If not, please try as this will help us diagnose the issue. Since you have one of the very first printers ever made, I suspect it is the old style tilt motor or loose quartz frame that is causing the issue.

Try this

Uninstall your VGA card
Reinstall
Update

I get rid of my lines problem similar with yours before by doing the steps above.

Thanks