Mark;
How much VC would it take to make these changes to the current Solus?
1. make the printer on a larger chassis to include the projector internally?
2. Change the vat system from the tilt quartz to a fixed glass vat.
3. make changes to the software to go between the 25 and 42 microns, instead of moving an external projector.
4. any guesstimation of new list price?
Bionic Solus Upgrade
- toddmichael
- Novice
- Posts:77
- Joined:Sun Jul 05, 2015 4:33 am
- Location:Motor City, Mi
Toddmichael
Firestorm Cad / Jeweler / Designer
Firestorm Cad / Jeweler / Designer
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Bionic Solus Upgrade
What's your budget?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Bionic Solus Upgrade
I'm wondering what the benefit would be of not having the tilt mechanism...
You should rephrase the question... "What would it cost to design a totally different machine?"
You should rephrase the question... "What would it cost to design a totally different machine?"
Re: Bionic Solus Upgrade
toddmichael wrote:Mark;
How much VC would it take to make these changes to the current Solus?
1. make the printer on a larger chassis to include the projector internally?
2. Change the vat system from the tilt quartz to a fixed glass vat.
3. make changes to the software to go between the 25 and 42 microns, instead of moving an external projector.
4. any guesstimation of new list price?
Wondering why you'd need 1 and 2 ?
Hope I'm not hijacking your thread now
I've been hoping for some improvements for the Solus for hopefully a Next Gen Machine
1. Improved Software - CW's slicing is nice but I feel there are a lot of improvements in terms of the speed in which models are moved on the build table as well as the interactivity rather than pressing buttons and waiting for a move
2. Slide Mechanism 25 microns to 42 microns ... would like it to attach w/ screws to the Projector and Solus rather than trying to place those pegs... which sometimes can be annoying ... And then a slide between settings preset.
3. Automated Shutter ... Since the projector takes a bit before it sets itself to print ... I would like it if somehow the shutter that we use the orange piece for now was an automated open close shutter
4. And an option to get one with a Lens Modification for No Distortion at 25 microns
Re: Bionic Solus Upgrade
I always end up misaligning the projector when I have to clean the dust from underneath it. It would be nice to have a single unit to pick up and not worry about any alignment issues.
Re: Bionic Solus Upgrade
KBS756 wrote:
2. Slide Mechanism 25 microns to 42 microns ... would like it to attach w/ screws to the Projector and Solus rather than trying to place those pegs... which sometimes can be annoying ... And then a slide between settings preset.
If you move the projector and not the printer it should be easy to change positions. But please wait until the projector has completely cooled to maximize bulb life.
Re: Bionic Solus Upgrade
toddmichael wrote:Mark;
How much VC would it take to make these changes to the current Solus?
1. make the printer on a larger chassis to include the projector internally?
2. Change the vat system from the tilt quartz to a fixed glass vat.
3. make changes to the software to go between the 25 and 42 microns, instead of moving an external projector.
4. any guesstimation of new list price?
Hi,
1. The external projector has some big advantages...it maximizes ventilation, keeps the projector horizontal as it was designed to be run and won't fill up with resin if there's a leak.
2. The tilt quartz is the key to our surface quality and ability to print such fine details. I have tested many, many methods and one of my first goals was to eliminate the need for PDMS while having a gentle release. There are other methods using non-stick film, but most suffer from sagging (can't offer the same layer precision) and much higher separation forces.
3. This would be nice but would obviously add a lot to the cost as we'd still need to move the projector somehow.
Re: Bionic Solus Upgrade
reify wrote:KBS756 wrote:
2. Slide Mechanism 25 microns to 42 microns ... would like it to attach w/ screws to the Projector and Solus rather than trying to place those pegs... which sometimes can be annoying ... And then a slide between settings preset.
If you move the projector and not the printer it should be easy to change positions. But please wait until the projector has completely cooled to maximize bulb life.
I still have problems with the consistency of these lining up meaning sometimes even if the pegs are in I'll have to nudge it around to make sure the printer is pointing squarely at the build area ... Would be nice if we could have it still horizontal but on a platform that assures its pointing where it should be and could latch on to the right setting with a simple slide
Re: Bionic Solus Upgrade
the pegs are trapezoidal, bend the alignment bracket slightly up, and it will seat the pegs.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Bionic Solus Upgrade
You should also be able to remove the pegs and just use them as screws to attach the mount to the printer.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 94 guests