now something else weird is happening

General topics about 3d printing.
manakawari
Solus Expert
Posts:136
Joined:Thu Feb 25, 2016 4:09 pm
now something else weird is happening

Postby manakawari » Wed Sep 12, 2018 9:27 pm

so now when I print, im getting the projector to project the image on the window and I can see the slices projecting like normal on the glass window, but now all of a sudden im also getting a much larger what appears to be "ghost image" of the same print thats also being projected and can be seen being projected on the black area of my solus around the window.

this just started yesterday and the print it was happening with successfully printed but I was able to see some of the ghost image that had cured on my build plate as well.

this cant be good and will eventually begin causing failed prints im sure of it.

maybe this problem is the cause of the cured resin on my film.

any ideas?
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: now something else weird is happening

Postby mongerdesigns » Wed Sep 12, 2018 10:46 pm

Those reflections are nothing to worry about. They don't even reach the mirror or the resin tank. So they cannot cure the resin.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Bracey
Posts:1
Joined:Tue Sep 11, 2018 8:14 am

Re: now something else weird is happening

Postby Bracey » Tue Sep 18, 2018 12:55 pm

mongerdesigns wrote:Those Zippyloan review reflections are nothing to worry about. They don't even reach the mirror or the resin tank. So they cannot cure the resin.


Good to know there's nothing to worry about. What is causing the reflections to happen though?
Last edited by Bracey on Tue Nov 22, 2022 2:04 pm, edited 2 times in total.
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: now something else weird is happening

Postby mongerdesigns » Tue Sep 18, 2018 2:48 pm

The front glass.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/

Who is online

Users browsing this forum: No registered users and 7 guests