Hi
I have been used the printer for about 1 year without any problem until yesterday.
I homed the building platform and then tried to leave it up.
But the software keep showing the error message as you guys can see in the attached figure.
It happened before but usually went away after few times of connection/disconnection of USD cable but not this time.
Please let me know if you guys have any solutions or suggestions
Thanks
need help!! error message keep showing
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: need help!! error message keep showing
Get the Contour software. Very reasonable for what all it does.
Re: need help!! error message keep showing
Hi,
May I ask where you are located so the someone can connect and check for you?
May I ask where you are located so the someone can connect and check for you?
Re: need help!! error message keep showing
reify wrote:Hi,
May I ask where you are located so the someone can connect and check for you?
Hi
Thank you very much.
We are in Tufts University, Medford (Boston), MA
address is 4 colby st. Medford.
Re: need help!! error message keep showing
Jewelermdt wrote:Get the Contour software. Very reasonable for what all it does.
Hi
Thank you very much for your suggestion.
Could you let me know where I can download it?
I try search the forum but cannot find it
Thanks again
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: need help!! error message keep showing
Hi,
Please contact me info@junction3d.com and I will help you out.
You can see the new software and get info here http://www.junction3d.com/contour/
Please contact me info@junction3d.com and I will help you out.
You can see the new software and get info here http://www.junction3d.com/contour/
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 8 guests