bulge on print

General topics about 3d printing.
AV Designs
Novice
Posts:33
Joined:Fri Dec 11, 2015 5:03 am
bulge on print

Postby AV Designs » Mon Jul 10, 2017 3:18 pm

Hey all, I've been getting prints where when almost finished it creates a bulge. I haven't been able to get a smooth print.
this is starting to happen in smaller designs. I have checked the film and put new resin. some items print fine then the bulge
does anyone have any similar problem. Help...
Attachments
WIN_20170710_10_08_06_Pro (2).jpg
WIN_20170710_10_08_06_Pro (2).jpg (32.05KiB)Viewed 7844 times
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: bulge on print

Postby mongerdesigns » Mon Jul 10, 2017 4:16 pm

Can't tell anything from that small photo. Maybe post a larger one, and from multiple angles?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
AV Designs
Novice
Posts:33
Joined:Fri Dec 11, 2015 5:03 am

Re: bulge on print

Postby AV Designs » Wed Jul 12, 2017 5:56 pm

sorry for the delay here are a couple of pics of the ring with the bulge and there are several others. my prints right now are hit and miss.
Attachments
WIN_20170712_12_52_03_Pro_LI.jpg
WIN_20170712_12_52_03_Pro_LI.jpg (94.94KiB)Viewed 7801 times
WIN_20170712_12_51_51_Pro_LI.jpg
WIN_20170712_12_51_51_Pro_LI.jpg (74.02KiB)Viewed 7801 times
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: bulge on print

Postby mongerdesigns » Wed Jul 12, 2017 9:30 pm

What resin is this?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
AV Designs
Novice
Posts:33
Joined:Fri Dec 11, 2015 5:03 am

Re: bulge on print

Postby AV Designs » Wed Jul 12, 2017 10:19 pm

this is the b9 green resin. Its been the only one ive been using. I never have had this happen. now many of the prints come out like this.
I try different places on the print head and I filter the resin before prints. just cant crack this nut???? small rings seem to print ok but I still get
some bulge

Who is online

Users browsing this forum: No registered users and 7 guests