These may be stupid questions but I am curious
Would a higher end projector produce better prints with castable resins?
Are the projectors we are using now maxed out or over kill with the tech we have?
I understand that resin type and quality effects the print quality.
Again I’m not complaining about Solus print quality, just curious if this would be a way to increase model quality with a castable resin.
Projectors vs Resins
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Projectors vs Resins
If you had a 4k DLP projector and were able to modify it to work with the Solus, then in theory, if the resin allowed, you would be able to print higher micron resolution in the XY. Again, if you could focus that close. Probably would require a lens modification.
But last time I checked 4k dlp projectors are still way too expensive.
But last time I checked 4k dlp projectors are still way too expensive.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 8 guests