(SOLVED)NVIDIA RGB ISSUE

[mongerdesigns]

This is not an rgb issue. It's like you're not outputting enough light. The bottom layers cure and the top layers don't. This happens when the UV filter is still inside he projector.

[ironfonzy]

Hello !!! So it s not RGB ? arFfff another problem so...because yes i removed the uv mirror....the projector came from US...it s in 110-220...does it means that i need a converter for France?..i don't think but i Will try....it ´s new one....pfffffuuu i will find....anyway thanks for your help and support....

[Jewelermdt]

I'm guessing you had to use a adapter plug to use in France. From what I read most European countries use 220-240 volt system. Which you would have to have a converter to downgrade to US 110-120 volt to run the projector and printer.

[ironfonzy]

I ve seen a user who have similar problem with a gtx970..next step is test with laptop

[ironfonzy]

Hello
>Finally after buy a lap top some failed print...my first test print arrived ...



New film, shaking well the resin, settings like the support doc for the rgb laptop, new calibration, model test.....Solus 3D you make my day..I closed the subject and will send new home print..!!!!
Thanks for Support , Jordi, Mark, Monger..

[exedebee]

Awesome