using computer

Topics about Solus 3d Printer's hardware
Marcoboo
Posts:5
Joined:Fri Oct 20, 2017 11:45 pm
using computer

Postby Marcoboo » Tue Nov 07, 2017 9:33 pm

hello;



I plan to buy a solus very soon. The quality of prints on this machine looks crazy and I ask myself a few newbie technical questions! why can not I use my computer while printing?
is it still true even with 2 screens?
thank you !!
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: using computer

Postby mongerdesigns » Tue Nov 07, 2017 9:43 pm

You can. However it's not recommended. For example if a program window or a pop up of some sort gets on the projection screen display, it will interfere with the printing.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Shinlocke
Novice
Posts:17
Joined:Mon Oct 23, 2017 6:10 pm
Location:Portland, OR

Re: using computer

Postby Shinlocke » Tue Nov 07, 2017 11:59 pm

It isn't usually pop-ups that you have to worry about, although depending on your screen setup that can be an issue. The issue is bogging down the video and processor. I was just using my laptop to browse the internet and reading facebook. Ended up clicking on a link which took me to a page, the ads/flash, etc bottlenecked the CPU that printer paused. I thought it had locked up. 10 seconds go by and finally, it moved and printing continued. I thought for sure that print would have been ruined, fortunately, it survived.

Also since you have two monitors hooked up, keep in mind that the Projector becomes another monitor. So now you have 3 monitors, 2 actual screens, and one projector. It can cause other issues just from that.

The best suggestion is to get a cheaper laptop or even mini desktop to run the printer. Setup a Google Drive or Dropbox to sync/share. Then use your other computer to slice your files, setup your supports and save the scenes. Then open them on your Solus CPU and print. It is definitely a huge benefit to be able to slice and create scenes, while my printer is printing.
Marcoboo
Posts:5
Joined:Fri Oct 20, 2017 11:45 pm

Re: using computer

Postby Marcoboo » Wed Nov 08, 2017 6:11 am

ok,
it becomes clearer for me. you need a computer dedicated to this single task.Cpu and pop up issues Can ruin à print. thankyou for your prompt response!!!

Who is online

Users browsing this forum: No registered users and 3 guests