list of available projectors

Topics about Solus 3d Printer's hardware
User avatar
ken3dcad
Novice
Posts: 36
Joined: Fri Jul 03, 2015 12:44 pm
Location: Central Texas
Contact:

Re: list of available projectors

Postby ken3dcad » Tue Jul 03, 2018 12:54 pm

Thanks Emil!
EddyF
Novice
Posts: 68
Joined: Thu Nov 12, 2015 7:22 pm
Location: Carlsbad

Re: list of available projectors

Postby EddyF » Tue Jul 03, 2018 5:01 pm

Is Junction testing any projectors, I need going to need a new one. How hard is it use a different project? I have the Infocus And I found this one https://www.amazon.com/InFocus-IN3138HD ... 3153&psc=1

I guess my lens will fit.
User avatar
mongerdesigns
Solus Guru
Posts: 1919
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: list of available projectors

Postby mongerdesigns » Tue Jul 03, 2018 5:29 pm

That projector should work Eddy. You may need to adjust the brightness down a bit though and play around with that because it's much stronger.

We sell the Vivitek 1186 for $949
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
printcast
Solus Expert
Posts: 157
Joined: Fri Oct 09, 2015 2:38 pm

Re: list of available projectors

Postby printcast » Tue Jul 31, 2018 9:46 pm

mongerdesigns wrote:The only one we sell and provide right now is the Vivitek 1186 for $950 plus shipping.



I can't find these in the store. My optima HD37 blew up. I'll take the Viviteck 1186 for $950 plus shipping. I'll need to expedite that shipping.
User avatar
mongerdesigns
Solus Guru
Posts: 1919
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: list of available projectors

Postby mongerdesigns » Tue Jul 31, 2018 10:11 pm

Please send an email to info@junction3d.com

The lead time on the projectors is about 1 week.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
printcast
Solus Expert
Posts: 157
Joined: Fri Oct 09, 2015 2:38 pm

Re: list of available projectors

Postby printcast » Wed Aug 01, 2018 12:29 pm

Just after messaging I did get one online. This is the only 3D printer in my shop so it has to be available to print as orders come in. Not knowing if you still carried them I just went ahead to make sure one was on the way.

I have no idea what happened to my Optoma. I took the plastic cover off the lamp, loosened 2 screws holding the lamp, inserted the new lamp, tightened the 2 screws, replaced the plastic cover, plugged the projector back it, it popped, smoked, sparks flew, heat glass cracked. I am completely lost as to what happened. My immediate guess is that the new lamp had a short. Here is what I do know, it cost me $1100 for a new projector.

Can you direct me to the Vivitek H1180HD setup page? I assume nothing changes with the computer setup.

Thank you
User avatar
mongerdesigns
Solus Guru
Posts: 1919
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: list of available projectors

Postby mongerdesigns » Wed Aug 01, 2018 4:08 pm

We don’t have experience with the Vivitek 1180. I’m assuming the setup will be similar to the 1185/1186
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/

Who is online

Users browsing this forum: No registered users and 5 guests