Screw size for the build plate?

Topics about Solus 3d Printer's hardware
ZachJ
Novice
Posts:43
Joined:Sat Nov 26, 2016 5:04 pm
Screw size for the build plate?

Postby ZachJ » Fri Jan 18, 2019 9:19 pm

I wanted to calibrate the build plate again and one of the four screws seems pretty worn/loose and I don’t trust it for much longer, so I’d like to replace it. Does anyone know what size/replacement it would be?
User avatar
Jewelermdt
Solus Master
Posts:809
Joined:Sun Jul 19, 2015 10:38 pm
Location:N.W. Florida
Contact:

Re: Screw size for the build plate?

Postby Jewelermdt » Sat Jan 19, 2019 4:48 am

Might not be the screw. Most are harden steel. My guess would be the softer aluminium. Most hardware stores will have a plate to find the right screw thread. I would bet it's metric though.
ZachJ
Novice
Posts:43
Joined:Sat Nov 26, 2016 5:04 pm

Re: Screw size for the build plate?

Postby ZachJ » Sat Jan 19, 2019 5:10 pm

After learning a lot about screws, its probably an "M2x3mm Hex Socket Knurled Head".

I hope its not the aluminum...after a week + of fighting to get the Solus Gray resin to work and the tilt motor dying, Im not in the mood for another piece of the Solus to fail. :?

Who is online

Users browsing this forum: No registered users and 2 guests