Hi Guys
I'm think of building a mini PC just for the printer. Can someone recommend an amount of RAM and processor/graphics I should use. I have noticed that CW is a bit juicy on the CPU (lags a lot on an i3) and 4GBs of RAM doesn't seem to be enough either.
Any suggestions?
Joe
Custom Mini PC for CW and Solus
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Custom Mini PC for CW and Solus
Here are the minimum reqs:
Intel i3, 4gb Ram, Intel HD Graphics 4000 or higher.
Obviously more is better:
Intel i7, 8gb Ram, Nvidia Geforce 730 or higher.
Intel i3, 4gb Ram, Intel HD Graphics 4000 or higher.
Obviously more is better:
Intel i7, 8gb Ram, Nvidia Geforce 730 or higher.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Custom Mini PC for CW and Solus
mongerdesigns wrote:Here are the minimum reqs:
Intel i3, 4gb Ram, Intel HD Graphics 4000 or higher.
Obviously more is better:
Intel i7, 8gb Ram, Nvidia Geforce 730 or higher.
Would you recommend Nvidia over intel?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Custom Mini PC for CW and Solus
On a laptop, recommend Intel. On a desktop, Nvidia.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Custom Mini PC for CW and Solus
Oh really, why's that?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Custom Mini PC for CW and Solus
Because on Laptops the nvidia setup is usually not so great. Usually a hybrid system with Intel running 2d graphics and Nvidia running 3d graphics. Can cause issues. Go with Intel only. Cheaper and less problematic.
On the desktop, you can get a dedicated Nvidia graphics card.
On the desktop, you can get a dedicated Nvidia graphics card.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Custom Mini PC for CW and Solus
mongerdesigns wrote:Because on Laptops the nvidia setup is usually not so great. Usually a hybrid system with Intel running 2d graphics and Nvidia running 3d graphics. Can cause issues. Go with Intel only. Cheaper and less problematic.
On the desktop, you can get a dedicated Nvidia graphics card.
What hardware configuration do you use?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Custom Mini PC for CW and Solus
I use a Lenovo g50-80 laptop. Intel i7, 6gb ram, Intel 5500 graphics. I got it on sale for $500.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Integrated graphics card
Hello there
I'm on the hunt for a suitable laptop, found many with Intel HD graphics 4000 but they are all integrated. Do they have to be dedicated Garaphics cards.
Many thanks
Hassiya
quote="Joetrfj"]
What hardware configuration do you use?[/quote]
I'm on the hunt for a suitable laptop, found many with Intel HD graphics 4000 but they are all integrated. Do they have to be dedicated Garaphics cards.
Many thanks
Hassiya
quote="Joetrfj"]
mongerdesigns wrote:Because on Laptops the nvidia setup is usually not so great. Usually a hybrid system with Intel running 2d graphics and Nvidia running 3d graphics. Can cause issues. Go with Intel only. Cheaper and less problematic.
On the desktop, you can get a dedicated Nvidia graphics card.
What hardware configuration do you use?[/quote]
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Custom Mini PC for CW and Solus
No. It doesn't have to be a dedicated graphics card. The integrated Intel HD graphics card is good enough. The reason it needs to be version 4000 or higher, is so that it accepts the latest driver updates for the graphics card. The older versions do not accept the new drivers.
Here are some examples of laptops that we recommend.
Basic model with Intel i3. Minimum recommended specs. Has windows 8 (recommended)
http://www.newegg.com/Product/Product.a ... 6834321079
Middle of the road model with Intel i5. Has windows 10, which is not ideal (can have some bugs).
http://www.newegg.com/Product/Product.a ... 6834321083
Higher end with Intel i7 and lots of memory. Has windows 8 (recommended)
http://www.newegg.com/Product/Product.a ... 6R42TS5256
Here are some examples of laptops that we recommend.
Basic model with Intel i3. Minimum recommended specs. Has windows 8 (recommended)
http://www.newegg.com/Product/Product.a ... 6834321079
Middle of the road model with Intel i5. Has windows 10, which is not ideal (can have some bugs).
http://www.newegg.com/Product/Product.a ... 6834321083
Higher end with Intel i7 and lots of memory. Has windows 8 (recommended)
http://www.newegg.com/Product/Product.a ... 6R42TS5256
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 10 guests