Moving from the home position +Z
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
I $h the machine like the "home the printer " video to follow the video "calibrating the build plate". The printer moved to the quarts but Its not responding to move up when hitting the +Z to get the build plate off the quarts.
Re: Moving from the home position +Z
Hi,
Did you remove the vat?
Did you remove the vat?
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
Re: Moving from the home position +Z
yes. It was removed
Re: Moving from the home position +Z
Sorry, I just see now that you mention to remove the build plate off the quartz...you cannot home with the build plate in.
-
- Novice
- Posts:27
- Joined:Mon Apr 25, 2016 10:29 pm
Re: Moving from the home position +Z
I followed the video. How do I get the printer to move +Z? Do I need to do some type of reset. The video said use $h to home for "calibrating build plate", it worked when I followed the video for "Home Printer".
Re: Moving from the home position +Z
Hi,
To calibrate the build plate you need to loosen all the build plate screws first, then home.
Please turn off the printer power, turn the Z screw by hand to raise the arm, remove the build plate and then $h again.
To calibrate the build plate you need to loosen all the build plate screws first, then home.
Please turn off the printer power, turn the Z screw by hand to raise the arm, remove the build plate and then $h again.
Who is online
Users browsing this forum: No registered users and 12 guests