Hello !
I think i have a problem with RGB issue and nvidia...At these time as you can see here's my first test...
I have geforce770..i install the latest driver for it and hope solve the problem.....
thanks if you have any suggestions..
(SOLVED)NVIDIA RGB ISSUE
Last edited by ironfonzy on Sat May 06, 2017 7:16 pm, edited 1 time in total.
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: NVIDIA RGB ISSUE
That does not look like the Nvida Control panel. Right click on you screen and see if the Nvida properties tab comes up.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: NVIDIA RGB ISSUE
You have too many things (monitors) connected to your PC.
When we say you need a dedicated computer for the Solus, it's not a light suggestion
When we say you need a dedicated computer for the Solus, it's not a light suggestion
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: NVIDIA RGB ISSUE
mongerdesigns wrote:You have too many things (monitors) connected to your PC.
When we say you need a dedicated computer for the Solus, it's not a light suggestion
ok i will try without my cintiq so..hope it will solve my problem..thanks for help talk to you soon
-
- Solus Expert
- Posts:197
- Joined:Wed Feb 17, 2016 10:36 pm
Re: NVIDIA RGB ISSUE
I don't see any RGB issue with your failed print. You should post some pic of the supported model that you are trying to print. Look like support issue.
Last edited by samatheang on Mon Apr 17, 2017 7:56 pm, edited 1 time in total.
-
- Solus Expert
- Posts:197
- Joined:Wed Feb 17, 2016 10:36 pm
Re: NVIDIA RGB ISSUE
You should try to re-calibrate your build platform by following the video here: https://reify3d.wistia.com/projects/ztww6a0tqj Also, you should tilt the model about 25 degree and support it well. Don't just rely on auto support.
If it is RGB problem, you will see the whole build area got cured, but your picture shows only the model and support area got cured.
If it is RGB problem, you will see the whole build area got cured, but your picture shows only the model and support area got cured.
ironfonzy wrote:These is the ultra complex model if i have not rgb problem why the first slice is ok and not the others ???
- Jewelermdt
- Solus Master
- Posts:809
- Joined:Sun Jul 19, 2015 10:38 pm
- Location:N.W. Florida
- Contact:
Re: NVIDIA RGB ISSUE
I would just put that model in contour and use NO supports. Or do both one with and one without. Make sure your support tips are big enough to support the model.
Is anything else running on the computer? No screensaver, No idle setting, No hibernating. You can NOT do any other work with computer while printing. Reason why it's suggested you get a separate computer to run the Solus.
Is anything else running on the computer? No screensaver, No idle setting, No hibernating. You can NOT do any other work with computer while printing. Reason why it's suggested you get a separate computer to run the Solus.
Last edited by Jewelermdt on Tue Apr 18, 2017 12:57 am, edited 1 time in total.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: NVIDIA RGB ISSUE
Have you removed the UV filter from your projector? It's a little square glass in-front of the projector bulb assembly. It's in the instructions.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 6 guests