Error Messages

User avatar
Just Bob
Novice
Posts:72
Joined:Fri Mar 25, 2016 4:37 pm
Error Messages

Postby Just Bob » Thu Jan 04, 2018 4:52 pm

Printed great last night. Projector shut off as planned. Tried to print another model this am. Didn't turn off or restart Contour.
Set up model in Contour....when I selected Print Wizard

Got this message.

Printing failed. Detected 1 USB serial port, but no Solus DLP controller among them.

Checked all connections, power, restarted computer 3 times.

THEN got this error

Printing failed Access denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))

Suggestions?

Just Bob
User avatar
Archerm
Solus Master
Posts:599
Joined:Mon Oct 26, 2015 1:57 pm
Location:North Carolina

Re: Error Messages

Postby Archerm » Thu Jan 04, 2018 6:15 pm

Bob turn everything off and try it again.
User avatar
Just Bob
Novice
Posts:72
Joined:Fri Mar 25, 2016 4:37 pm

Re: Error Messages

Postby Just Bob » Thu Jan 04, 2018 8:01 pm

Archerm wrote:Bob turn everything off and try it again.



SO Mark, you got the inside scoop or something??? hahaha

I must have restarted 6 times!!

Maybe 7 is the charm!

AND when I was trying to login on the Solus computer to get the newest update for Contour ( I KEEP it off the internet on purpose...good ol' Windows updates and all) WINDOWS caught me and took over! About an hour update!!

ANYWAY...it went past the Error messages. Go figure.


What did you know???

Just Bob
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Error Messages

Postby mongerdesigns » Thu Jan 04, 2018 8:22 pm

Make sure to check your Full Rgb settings after the windows update.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Just Bob
Novice
Posts:72
Joined:Fri Mar 25, 2016 4:37 pm

Re: Error Messages

Postby Just Bob » Fri Jan 05, 2018 1:36 pm

Will do!

I did a print just after it started working....came out GREAT!
Attachments
20180105_082049.jpg
User avatar
Just Bob
Novice
Posts:72
Joined:Fri Mar 25, 2016 4:37 pm

Re: Error Messages

Postby Just Bob » Fri Jan 05, 2018 6:41 pm

Well, it's doing it again.

Printed last night. NOT CONNECTED to internet. Projector shut off as planned

Print was great.
turned on projector
Tried to print another item

SAME ERROR messages. Restarted computer, still error messages.

Suggestions?

THANKS!
Just Bob
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Error Messages

Postby mongerdesigns » Fri Jan 05, 2018 7:32 pm

Sounds like a USB issue. Try changing the cable and the USB port.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
Just Bob
Novice
Posts:72
Joined:Fri Mar 25, 2016 4:37 pm

Re: Error Messages

Postby Just Bob » Fri Jan 05, 2018 7:36 pm

I'll give it a go.

Stay tuned.
User avatar
Just Bob
Novice
Posts:72
Joined:Fri Mar 25, 2016 4:37 pm

Re: Error Messages

Postby Just Bob » Fri Jan 05, 2018 9:11 pm

Changed the usb port. Only have one cable for SOLUS DLP controller. ASSUMING that's the silver cable that shuts off the projector when finished/??

It's not recognizing the USB for the DLP controller
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Error Messages

Postby mongerdesigns » Fri Jan 05, 2018 10:05 pm

No. That is the main usb cable.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/

Who is online

Users browsing this forum: No registered users and 10 guests