What do you guys use to calibrate your projectors?
Please let me know. Thanks!!!
Calibration file for projector?
Re: Calibration file for projector?
What software are you using? I use tracing paper with a rectangle with the correct dimensions printed on it to project the grid on to calibrate the build area. Place the orange shutter over the tracing paper when you do the calibration.
Re: Calibration file for projector?
The new software.. Almost done hooking everything up... Isn't there a print out or something?
Archerm wrote:What software are you using? I use tracing paper with a rectangle with the correct dimensions printed on it to project the grid on to calibrate the build area. Place the orange shutter over the tracing paper when you do the calibration.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Calibration file for projector?
It's the PRINT WIZARD button.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Calibration file for projector?
If you unzip this guy, open the .3DM in Rhino and print it out (make sure to print from the Top view and click on Extents) then the result should be pretty close to 80x45. I use this to calibrate my machine when going back and forth from 25 to 42.
- Attachments
-
- 80x45 PrintSheet.zip
- (1.31MiB)Downloaded 622 times
Who is online
Users browsing this forum: No registered users and 88 guests