Calibration file for projector?

[nillard]

What do you guys use to calibrate your projectors?
Please let me know. Thanks!!!

[Archerm]

What software are you using? I use tracing paper with a rectangle with the correct dimensions printed on it to project the grid on to calibrate the build area. Place the orange shutter over the tracing paper when you do the calibration.

[nillard]

The new software.. Almost done hooking everything up... Isn't there a print out or something?

What software are you using? I use tracing paper with a rectangle with the correct dimensions printed on it to project the grid on to calibrate the build area. Place the orange shutter over the tracing paper when you do the calibration.

[mongerdesigns]

It's the PRINT WIZARD button.

[hx19035]

If you unzip this guy, open the .3DM in Rhino and print it out (make sure to print from the Top view and click on Extents) then the result should be pretty close to 80x45. I use this to calibrate my machine when going back and forth from 25 to 42.