Exposure times during build

User avatar
toddmichael
Novice
Posts:77
Joined:Sun Jul 05, 2015 4:33 am
Location:Motor City, Mi
Exposure times during build

Postby toddmichael » Fri Aug 21, 2015 2:18 am

Hello all;

I am starting a new build and a few failures, and as I am sitting here watching the printer, the first 7 or so exposures are about 18 seconds long, then they drop off to about 3.5 seconds. Does this sound correct, my other printers both expose from about 18 to 45 seconds per layer?

How to I determine it this is the failure issue, and how do I adjust, and what did I do to have this build sequence?

Toddmichael
Toddmichael
Firestorm Cad / Jeweler / Designer
User avatar
mongerdesigns
Solus Guru
Posts:1950
Joined:Sat Apr 25, 2015 5:16 pm
Location:Los Angeles
Contact:

Re: Exposure times during build

Postby mongerdesigns » Fri Aug 21, 2015 3:14 am

That is correct. 18s for the 3 base layers then 2.6s for subsequent layers after that.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/

Who is online

Users browsing this forum: No registered users and 10 guests