Contour Software quesiton
Feel dumb asking but I can't seem to figure out. Once you open up your file and it pops up on the stage. Say you move it around a bit and then add a few more models to the Stage. How to you toggle between models?
Best Regards,
Luke Johnson
Senior Designer
Arthur's Jewelers Creations.
Other Custom Designs by Luke Johnson
Luke Johnson
Senior Designer
Arthur's Jewelers Creations.
Other Custom Designs by Luke Johnson
Re: Contour Software quesiton
You should be able to just click on the model to select it. Can you move the first model with the mouse?
Re: Contour Software quesiton
Thank you for getting back to me.
I am not able to click on it or move it with the mouse. Mouse controls work fine when clicking on the tool controls for Movement, scale, and rotation. Also fine for camera orientation. So once I orientate and place the model how I want and then load an other one, I can never click back to the first one.
I am not able to click on it or move it with the mouse. Mouse controls work fine when clicking on the tool controls for Movement, scale, and rotation. Also fine for camera orientation. So once I orientate and place the model how I want and then load an other one, I can never click back to the first one.
Best Regards,
Luke Johnson
Senior Designer
Arthur's Jewelers Creations.
Other Custom Designs by Luke Johnson
Luke Johnson
Senior Designer
Arthur's Jewelers Creations.
Other Custom Designs by Luke Johnson
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Contour Software quesiton
Make sure your screen scaling is at 100% and not larger. Some computers have issues with this. Let me know if that fixes it for you.
This is how it's done at in Windows 8.
Also, what kind of graphics card does your computer have? If it's Nvidia, you may need to update your driver.
If it doesn't work, email me and I'll connect to your PC and fix it for you. info@junction3d.com
This is how it's done at in Windows 8.
Also, what kind of graphics card does your computer have? If it's Nvidia, you may need to update your driver.
If it doesn't work, email me and I'll connect to your PC and fix it for you. info@junction3d.com
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Contour Software quesiton
Currently I am using win 7 and the projector can not be turned off automatically.
Do I need to upgrade to win 8 or 10 win.
Thanks !
Do I need to upgrade to win 8 or 10 win.
Thanks !
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Contour Software quesiton
Have you selected your projector from the Edit/Preferences? Is the rs232 cable connected to the back of the projector and to the pic? Does the com port for the rs232 cable show up in device manager?
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Contour Software quesiton
Hi
Anything good .
I used software CW,The projector shut down automatically after printing is complete.
Can you hepl me !
Anything good .
I used software CW,The projector shut down automatically after printing is complete.
Can you hepl me !
Re: Contour Software quesiton
Is your Win 7 32 or 64 bit?
Re: Contour Software quesiton
I have the same issue. My Solus laptop, windows 8, Contour works fine. But on my CAD laptop, windows 10, I can't click between models.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Contour Software quesiton
Try updating your graphics driver.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 85 guests