Page 1 of 1
Support issue
Posted: Wed Jul 26, 2017 11:21 am
by kmlsoni
Hi,
I put support with the base of 6mm when I restore, it goes back to default 4mm base, Why?
Regard,
Kamal Soni
Re: Support issue
Posted: Wed Jul 26, 2017 5:54 pm
by mongerdesigns
Before you open the scene file, or before you restore the supports, adjust the settings you want in the automatic supports section, and those will be used during supports restore (except the originally saved support tips sizes)
Re: Support issue
Posted: Fri Jul 28, 2017 5:24 pm
by Robert
Here's a step by step!
1. Open the file
2. Go to automatic support settings, change them to the desired settings. DO NOT CLICK GENERATE SUPPORTS.
3. Move one of your objects on the scene.
4. Hit restore supports.
Your supports should now have the desired base size and support thickness.
Re: Support issue
Posted: Tue Nov 28, 2017 5:23 pm
by SWDesign
Thanks, I just ran into this situation and just redid everything. Won't have to do it next time. It's great that this is so easy to use that it was no problem anyway. Just nice to be able to reprint anytime.