Hello,
Can we get bottom view in addition to all the other views. Not sure why it was omitted. I find it useful to add supports looking from the bottom.
Bottom view for Contour
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Bottom view for Contour
Will do.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Bottom view for Contour
+1 !!!
And also auto arrangement parts
And also auto arrangement parts
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Bottom view for Contour
barth wrote:+1 !!!
And also auto arrangement parts
We sort of have that now, but are continuing to improve it. If you drag models into the view or open multiples, they get arranged on the build platform until there is no more room.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Bottom view for Contour
is there a way to arrange the rings in different levels in the Z so as to accommodate more rings without counter adding the supports and making them all even in that process ??
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Bottom view for Contour
rsaldivar wrote:is there a way to arrange the rings in different levels in the Z so as to accommodate more rings without counter adding the supports and making them all even in that process ??
Nothing like that. I suggest doing that in cad and saving the stl.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Bottom view for Contour
so only two levels , auto support level and flat on plate level , Right ?
Re: Bottom view for Contour
mongerdesigns wrote:We sort of have that now, but are continuing to improve it. If you drag models into the view or open multiples, they get arranged on the build platform until there is no more room.
Yes but if you need to orientate parts after opening them or sometime it's little bit to close or just not where you want.
Who is online
Users browsing this forum: No registered users and 65 guests