***Totally Stoked!!***

Show off your prints.
diamantelor
Novice
Posts:12
Joined:Fri Jul 01, 2016 9:55 am
Re: ***Totally Stoked!!***

Postby diamantelor » Fri Oct 06, 2017 2:58 pm

Hello Friend
what projector you used?
User avatar
Archerm
Solus Master
Posts:599
Joined:Mon Oct 26, 2015 1:57 pm
Location:North Carolina

Re: ***Totally Stoked!!***

Postby Archerm » Fri Oct 06, 2017 3:34 pm

I am using a InFocus HD8606
diamantelor wrote:Hello Friend
what projector you used?
diamantelor
Novice
Posts:12
Joined:Fri Jul 01, 2016 9:55 am

Re: ***Totally Stoked!!***

Postby diamantelor » Fri Oct 06, 2017 4:11 pm

I have vivitek 1188 and do not calibrate
User avatar
Archerm
Solus Master
Posts:599
Joined:Mon Oct 26, 2015 1:57 pm
Location:North Carolina

Re: ***Totally Stoked!!***

Postby Archerm » Fri Oct 06, 2017 7:57 pm

Todays prints! :ugeek:

Image

Image

Image

Image
rsaldivar
Solus Master
Posts:327
Joined:Tue Jun 30, 2015 8:51 pm

Re: ***Totally Stoked!!***

Postby rsaldivar » Fri Oct 06, 2017 9:56 pm

nice , cool supports
eangor
Novice
Posts:20
Joined:Thu Oct 05, 2017 6:42 pm

Re: ***Totally Stoked!!***

Postby eangor » Sat Oct 07, 2017 6:12 pm

Thank you very much for the detail response. I will try your step. :)

Archerm wrote:I use the Optional Film Install Adaptor. You can Find it here.

Then This is how I install the film.

After the film is installed I tighten the vat all the way down. Then loosen the thumb screws till the vat starts to be loose. Then tighten the thumbscrews 1/4 to 1/2 turn. Then print.
I paint the slots in the thumb screws white so I can keep track of the turns easier. I also mark the vat so it is always installed the same direction.
Image

eangor wrote:Very nice prints. Could you share how you replace your film please? Also, how much do you tighten the thumbscrews? I always have a hard time figuring this out. Thank you.
User avatar
Archerm
Solus Master
Posts:599
Joined:Mon Oct 26, 2015 1:57 pm
Location:North Carolina

Re: ***Totally Stoked!!***

Postby Archerm » Mon Oct 09, 2017 7:13 pm

Mondays prints!! Rollin on!! :mrgreen:

Image

Image

Image
User avatar
M-Williams
Solus Master
Posts:393
Joined:Sun Nov 01, 2015 4:45 pm

Re: ***Totally Stoked!!***

Postby M-Williams » Tue Oct 10, 2017 2:37 am

Beautiful prints.
User avatar
Archerm
Solus Master
Posts:599
Joined:Mon Oct 26, 2015 1:57 pm
Location:North Carolina

Re: ***Totally Stoked!!***

Postby Archerm » Wed Feb 21, 2018 8:49 pm

It has been crazy busy since before Thanksgiving!! I have been doing a bunch of 42XY printing since before Christmas. Enjoy!!

Image

Image

Image

Image

Image
User avatar
Archerm
Solus Master
Posts:599
Joined:Mon Oct 26, 2015 1:57 pm
Location:North Carolina

Re: ***Totally Stoked!!***

Postby Archerm » Wed Feb 21, 2018 11:13 pm

A few more from today!! I like it!! :mrgreen: :mrgreen: :mrgreen:

Image

Image

Image

Who is online

Users browsing this forum: No registered users and 8 guests