First Tests with B9 Emerald Green resin, seems to grow well with minimum tweeking of the settings.
Sent two models for casting, results will be interesting. Just out of interest the Nautilus Shell Model is Hollow.
B9 Emerald Green Models
Re: B9 Emerald Green Models
How is the detail compared th the cherry? Is it flexible like the cheery or more brittle? Just curious about the properties. The pieces look great. MARK
Re: B9 Emerald Green Models
Possibly not quite as sharp as the cherry but still quite adequate, especially when you factor into the cleaning up and polishing to a mirror finish which all take their toll on sharp detail.
After curing it feels a little more pliable to me but still robust.
Hopes that helps
After curing it feels a little more pliable to me but still robust.
Hopes that helps
Re: B9 Emerald Green Models
Thank you.
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: B9 Emerald Green Models
I would say the Emerald is a nice improvement over cherry. It's much sharper and more stable. The easier castability doesn't hurt either. Still doing some tests, but so far so good.
I'm not sure why your prints were not as sharp, but that just may be the settings. I have posted a cw resin profile for the emerald (25xy30z) here.
viewtopic.php?f=13&t=149
Will post some photos shortly.
I'm not sure why your prints were not as sharp, but that just may be the settings. I have posted a cw resin profile for the emerald (25xy30z) here.
viewtopic.php?f=13&t=149
Will post some photos shortly.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 103 guests