Print from Indonesia

Show off your prints.
Waever
Novice
Posts: 83
Joined: Sat Apr 23, 2016 10:34 am

Print from Indonesia

Postby Waever » Mon Jun 13, 2016 9:03 pm

hi everyone

greetings from Indonesia
Solus is my first dlp 3d printer. and i am very happy purchasing it.

here are some of test prints that i've done.

Image

Image

both are smaller than coin.
Last edited by Waever on Fri Oct 14, 2016 11:58 am, edited 2 times in total.
User avatar
mongerdesigns
Solus Guru
Posts: 1940
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: learning dlp 3d print with solus

Postby mongerdesigns » Mon Jun 13, 2016 10:20 pm

Try moving the printer arm (without resin tank and platform) all the way up and down about 15 times. That should lubricate the bearings and give you much smoother prints.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Waever
Novice
Posts: 83
Joined: Sat Apr 23, 2016 10:34 am

Re: learning dlp 3d print with solus

Postby Waever » Tue Jun 14, 2016 7:33 pm

Thanks for the advice Monger

Well i've printed another one and it turns out super smooth. I've also confirmed the guitar print has lines because it was too thick and should be hollowed.
Image
Waever
Novice
Posts: 83
Joined: Sat Apr 23, 2016 10:34 am

Re: Print from Indonesia

Postby Waever » Sat Oct 08, 2016 6:48 pm

first print using B9 emerald, for commission work.
turns out very great!
Solus is great, even my fingerprint is way rougher LOL

Image20161008_124830 by dennys -, on Flickr
User avatar
jeweltool
Novice
Posts: 58
Joined: Wed Jul 01, 2015 8:57 pm

Re: Print from Indonesia

Postby jeweltool » Sat Oct 08, 2016 8:26 pm

Very nice prints!
User avatar
mongerdesigns
Solus Guru
Posts: 1940
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: Print from Indonesia

Postby mongerdesigns » Sat Oct 08, 2016 9:06 pm

Great print and photo!
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
Waever
Novice
Posts: 83
Joined: Sat Apr 23, 2016 10:34 am

Re: Print from Indonesia

Postby Waever » Sat Oct 08, 2016 9:15 pm

jeweltool wrote:Very nice prints!

thanks

mongerdesigns wrote:Great print and photo!

thanks, it was taken using my mobile phone samsung alpha, held close to desktop lamp. LOL
Waever
Novice
Posts: 83
Joined: Sat Apr 23, 2016 10:34 am

Re: Print from Indonesia

Postby Waever » Sun Oct 09, 2016 6:22 pm

Ok so i just finish making my girlfriend headsculpt using 3d model and print with Solus, paint by my friend. and then i decided to make 3d sculpt hair rather than rooting the hair.
both headsculpt and hair printed using solus proto 42xy25z, model is hollowed with 1mm thickness for the head and 0,5mm thickness for the hair.

very happy with the print result. the detail is very crisp.

Image14568144_10154660589864791_4586848121044167992_n by dennys -, on Flickr
User avatar
jeweltool
Novice
Posts: 58
Joined: Wed Jul 01, 2015 8:57 pm

Re: Print from Indonesia

Postby jeweltool » Sun Oct 09, 2016 9:32 pm

Your girlfriend is amazing!!
Waever
Novice
Posts: 83
Joined: Sat Apr 23, 2016 10:34 am

Re: Print from Indonesia

Postby Waever » Fri Oct 14, 2016 11:42 am

I am truly amaze...
whether it's solus that's great or b9 emerald resin.

Image20160920_224759 by dennys -,
so I got commission work to print this ring, customer requested using castable resin and asked me to cast it into silver with finishing oxidize for Him.
I printed it, since I don't know how to cast metal, I gave it to local foundry here, who has no experience with 3d print castable resin.
And... the silver cast result is awesome. PERFECT!

Image20161014_110304 by dennys -,
Image20161014_110248 by dennys -,

Who is online

Users browsing this forum: No registered users and 8 guests