Page 1 of 2

Print from Indonesia

Posted: Mon Jun 13, 2016 9:03 pm
by Waever
hi everyone

greetings from Indonesia
Solus is my first dlp 3d printer. and i am very happy purchasing it.

here are some of test prints that i've done.

Image

Image

both are smaller than coin.

Re: learning dlp 3d print with solus

Posted: Mon Jun 13, 2016 10:20 pm
by mongerdesigns
Try moving the printer arm (without resin tank and platform) all the way up and down about 15 times. That should lubricate the bearings and give you much smoother prints.

Re: learning dlp 3d print with solus

Posted: Tue Jun 14, 2016 7:33 pm
by Waever
Thanks for the advice Monger

Well i've printed another one and it turns out super smooth. I've also confirmed the guitar print has lines because it was too thick and should be hollowed.
Image

Re: Print from Indonesia

Posted: Sat Oct 08, 2016 6:48 pm
by Waever
first print using B9 emerald, for commission work.
turns out very great!
Solus is great, even my fingerprint is way rougher LOL

Image20161008_124830 by dennys -, on Flickr

Re: Print from Indonesia

Posted: Sat Oct 08, 2016 8:26 pm
by jeweltool
Very nice prints!

Re: Print from Indonesia

Posted: Sat Oct 08, 2016 9:06 pm
by mongerdesigns
Great print and photo!

Re: Print from Indonesia

Posted: Sat Oct 08, 2016 9:15 pm
by Waever
jeweltool wrote:Very nice prints!

thanks

mongerdesigns wrote:Great print and photo!

thanks, it was taken using my mobile phone samsung alpha, held close to desktop lamp. LOL

Re: Print from Indonesia

Posted: Sun Oct 09, 2016 6:22 pm
by Waever
Ok so i just finish making my girlfriend headsculpt using 3d model and print with Solus, paint by my friend. and then i decided to make 3d sculpt hair rather than rooting the hair.
both headsculpt and hair printed using solus proto 42xy25z, model is hollowed with 1mm thickness for the head and 0,5mm thickness for the hair.

very happy with the print result. the detail is very crisp.

Image14568144_10154660589864791_4586848121044167992_n by dennys -, on Flickr

Re: Print from Indonesia

Posted: Sun Oct 09, 2016 9:32 pm
by jeweltool
Your girlfriend is amazing!!

Re: Print from Indonesia

Posted: Fri Oct 14, 2016 11:42 am
by Waever
I am truly amaze...
whether it's solus that's great or b9 emerald resin.

Image20160920_224759 by dennys -,
so I got commission work to print this ring, customer requested using castable resin and asked me to cast it into silver with finishing oxidize for Him.
I printed it, since I don't know how to cast metal, I gave it to local foundry here, who has no experience with 3d print castable resin.
And... the silver cast result is awesome. PERFECT!

Image20161014_110304 by dennys -,
Image20161014_110248 by dennys -,