DB Studio

Show off your prints.
User avatar
exedebee
Solus Expert
Posts: 128
Joined: Fri Feb 12, 2016 3:39 am

Re: DB Studio

Postby exedebee » Wed Jul 18, 2018 7:07 am

first time SolusWax
Attachments
20180716_185703.jpg
soluswax 42xy30z
printcast
Solus Expert
Posts: 157
Joined: Fri Oct 09, 2015 2:38 pm

Re: DB Studio

Postby printcast » Wed Jul 18, 2018 10:47 am

Looks amazing.

Please let us know how your cast turn out and what your process was from any cure to burnout cycle. My cast with a sample bottle didn't turn out as well as others. I also had to crank up my times for successful prints but my lamp has 1200hrs. A replacement lamp has been ordered.
User avatar
CADjewelrySchool
Novice
Posts: 71
Joined: Wed Sep 16, 2015 10:28 am

Re: DB Studio

Postby CADjewelrySchool » Wed Jul 18, 2018 10:44 pm

exedebee wrote:first time SolusWax

exedebee...SolusWax prints really nicely doesn't it. The surface finish is certainly smoother than what I have seen with B9 Emerald over the last 3-years or so :-) Even better is the fast burnout and great castings - no more long post curing processes either.
User avatar
exedebee
Solus Expert
Posts: 128
Joined: Fri Feb 12, 2016 3:39 am

Re: DB Studio

Postby exedebee » Thu Jul 19, 2018 4:00 am

printcast wrote:Looks amazing.

Please let us know how your cast turn out and what your process was from any cure to burnout cycle. My cast with a sample bottle didn't turn out as well as others. I also had to crank up my times for successful prints but my lamp has 1200hrs. A replacement lamp has been ordered.


I send to casting outside. my lamp about 1800 hrs. but I will be replacement 2000 hrs. or can't print out.
User avatar
exedebee
Solus Expert
Posts: 128
Joined: Fri Feb 12, 2016 3:39 am

Re: DB Studio

Postby exedebee » Thu Jul 19, 2018 4:06 am

CADjewelrySchool wrote:
exedebee wrote:first time SolusWax

exedebee...SolusWax prints really nicely doesn't it. The surface finish is certainly smoother than what I have seen with B9 Emerald over the last 3-years or so :-) Even better is the fast burnout and great castings - no more long post curing processes either.


yes,so smoother than b9 emerald. for castings I send outside but have 2 option curing 30 Minute and not curing will post after finish.
User avatar
JamesFitts
Novice
Posts: 10
Joined: Fri Sep 11, 2020 10:07 am

Re: DB Studio

Postby JamesFitts » Tue Sep 15, 2020 2:19 am

Wow! :?

Who is online

Users browsing this forum: No registered users and 5 guests