Two headed Snake by Nacho Reisco. Printed on the Solus at 25xy30z resolution. 3 hours and 45 minutes total print time.
Two headed Snake by Nacho Riesco
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- CADjewelrySchool
- Novice
- Posts:71
- Joined:Wed Sep 16, 2015 10:28 am
Re: Two headed Snake by Nacho Riesco
WOW! Just WOW! Emil. Awesome print.
Is that model printed with the prototype Solus castable resin rather than cherry? It looks a different color.
Would be good to know the vertical (Z height) build speed if that is the prototype new resin.
What is the approx height of the build (with supports)?
Is that model printed with the prototype Solus castable resin rather than cherry? It looks a different color.
Would be good to know the vertical (Z height) build speed if that is the prototype new resin.
What is the approx height of the build (with supports)?
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Two headed Snake by Nacho Riesco
Hi Rik,
Yes, it's the prototype resin. The print including the supports is approx. 44mm tall. Took 3 hours and 45minutes at the 30 micron Z setting. So not bad. Since it's a very low viscosity resin, we can have shorter settle times, which can speed up things a lot.
Yes, it's the prototype resin. The print including the supports is approx. 44mm tall. Took 3 hours and 45minutes at the 30 micron Z setting. So not bad. Since it's a very low viscosity resin, we can have shorter settle times, which can speed up things a lot.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 4 guests