Prints by Monger
- CADjewelrySchool
- Novice
- Posts:71
- Joined:Wed Sep 16, 2015 10:28 am
Nice prints Emil. How far away is it do you think till you release the new Gray Resin? At least you don't have to fine-tune the resin for casting. LOL
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Thanks Rik. Probably 2 weeks away. Just optimizing the print profile, etc.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Re: Prints by Monger
I guess I need a little bit of explaining ,
how is this this resin diff from the proto ?? is it finer micron grow ?? more workable as far as , after cure able to file and polish ?? I mean those grows are amazing but wouldn't they be just as amazing in the proto ?? paintable ? there has to be a reason behind this new resin more than just the color ?? can you grow the same file in the proto so as we can compare please or explain the differences between the two
how is this this resin diff from the proto ?? is it finer micron grow ?? more workable as far as , after cure able to file and polish ?? I mean those grows are amazing but wouldn't they be just as amazing in the proto ?? paintable ? there has to be a reason behind this new resin more than just the color ?? can you grow the same file in the proto so as we can compare please or explain the differences between the two
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
We have lots of customers who are digital sculptors. They asked for a grey color resin. The resin is not the same as proto and is not a replacement for it. The main feature of this resin is that it's grey.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Roger. Here is the ring you sent me to print. I will mail them to you on Monday.
We plan on releasing this resin as soon as we optimize the print profiles for various resolutions. Shouldn't be too long.
We plan on releasing this resin as soon as we optimize the print profiles for various resolutions. Shouldn't be too long.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
Another model by Rocco Tartamella printed in the grey resin.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
- CADjewelrySchool
- Novice
- Posts:71
- Joined:Wed Sep 16, 2015 10:28 am
Re: Prints by Monger
Super smooth surface. That looks like ceramic.
Re: Prints by Monger
Amazing sharp detail on that class ring!
Re: Prints by Monger
man thats crisp , was this grown on the solus ? or the new solus , the 28 xy , 4K projector one
- mongerdesigns
- Solus Guru
- Posts:1950
- Joined:Sat Apr 25, 2015 5:16 pm
- Location:Los Angeles
- Contact:
Re: Prints by Monger
It was grown on the current Solus at 42xy/30z resolution.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
http://www.mongerdesigns.com
Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com
Follow us on Instagram!
https://www.instagram.com/junction3d/
Who is online
Users browsing this forum: No registered users and 8 guests