Ironfonzy's Prints

Show off your prints.
User avatar
ironfonzy
Novice
Posts: 39
Joined: Thu Jan 05, 2017 9:16 pm
Location: Bordeaux France

Ironfonzy's Prints

Postby ironfonzy » Thu Aug 10, 2017 8:20 am

Hello Family Solus..
After some lots of problems (projector with bad lamp etc...)here some of my first print before finishing and casting in silver..My rings are the most of the time heavy so need to adjust my supports and i put all the time text inside....I'm very happy with Solus..Thanks Jordi and the team for their supports..

Image
Image
Image
Image
rsaldivar
Solus Master
Posts: 307
Joined: Tue Jun 30, 2015 8:51 pm

Re: Ironfonzy's Prints

Postby rsaldivar » Thu Aug 10, 2017 3:17 pm

those are heavy rings , make sure to anneal before you cast , dont just UV them
User avatar
ironfonzy
Novice
Posts: 39
Joined: Thu Jan 05, 2017 9:16 pm
Location: Bordeaux France

Re: Ironfonzy's Prints

Postby ironfonzy » Fri Aug 11, 2017 3:05 pm

Thanks ...what to you mean by anneal?
User avatar
mongerdesigns
Solus Guru
Posts: 1933
Joined: Sat Apr 25, 2015 5:16 pm
Location: Los Angeles
Contact:

Re: Ironfonzy's Prints

Postby mongerdesigns » Fri Aug 11, 2017 3:58 pm

Heat treat. Low temperature oven (150f) for about 1-2 hours.
Monger Designs a.k.a. Monger
http://www.mongerdesigns.com

Junction3d - Official US Distributor for the SOLUS 3D PRINTER
http://www.junction3d.com

Follow us on Instagram!
https://www.instagram.com/junction3d/
User avatar
ironfonzy
Novice
Posts: 39
Joined: Thu Jan 05, 2017 9:16 pm
Location: Bordeaux France

Re: Ironfonzy's Prints

Postby ironfonzy » Mon Sep 04, 2017 7:10 pm

another good print..! :D
Image
Image
User avatar
ironfonzy
Novice
Posts: 39
Joined: Thu Jan 05, 2017 9:16 pm
Location: Bordeaux France

Re: Ironfonzy's Prints

Postby ironfonzy » Mon Sep 18, 2017 3:00 pm

and some castings...
Image
User avatar
JesseTaylor
Novice
Posts: 24
Joined: Wed Apr 27, 2016 1:51 am

Re: Ironfonzy's Prints

Postby JesseTaylor » Mon Oct 16, 2017 3:38 am

Nice chunky designs...very cool
User avatar
ironfonzy
Novice
Posts: 39
Joined: Thu Jan 05, 2017 9:16 pm
Location: Bordeaux France

Re: Ironfonzy's Prints

Postby ironfonzy » Thu Oct 19, 2017 9:00 pm

Thanks Jessy..
some new rings from cast and finished..

Image
Image
Image
User avatar
ironfonzy
Novice
Posts: 39
Joined: Thu Jan 05, 2017 9:16 pm
Location: Bordeaux France

Re: Ironfonzy's Prints

Postby ironfonzy » Sun Nov 12, 2017 4:14 pm

New prints on the bench ;)

Image

Image
studiojoia
Novice
Posts: 96
Joined: Mon Mar 28, 2016 8:05 am

Re: Ironfonzy's Prints

Postby studiojoia » Thu Nov 16, 2017 3:49 pm

Awesome prints Arnaud :)

Who is online

Users browsing this forum: No registered users and 12 guests